Tool Holder Blanks

HSK-A Tool Holder Blanks

TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.

Details PDF (619.525)

Taper	L (mm)	D (mm)	f1 (mm)	f2 (mm)	d1 (mm)	d9 (mm)	Standard	Part Number
HSK-A 25	100	25	10	20	25	16.4	ISO 12164-1 / DIN 69893 / ASME B5.62	619.525.025.100
HSK-A 32	120	40	20	35	32	26	ISO 12164-1 / DIN 69893 / ASME B5.62	619.532.040.120
HSK-A 40	100	40	20	35	40	34	ISO 12164-1 / DIN 69893 / ASME B5.62	619.540.040.100
HSK-A 50	100	50	26	42	50	42	ISO 12164-1 / DIN 69893 / ASME B5.62	619.550.050.100
HSK-A 50	160	63	26	42	50	42	ISO 12164-1 / DIN 69893 / ASME B5.62	619.550.063.160
HSK-A 50	200	63	26	42	50	42	ISO 12164-1 / DIN 69893 / ASME B5.62	619.550.063.200
HSK-A 63	100	63	42	63			ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.063.100
HSK-A/T 63	140	63	26	63		N/A	ISO 12164-3 (ICTM)	619.563.063.140
HSK-A 63	200	63	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.063.200
HSK-A 63	160	80	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.080.160
HSK-A 63	250	80	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.080.250
HSK-A 63	250	100	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.100.250
HSK-A/T 63	140	108	26		63	N/A	ISO 12164-3 (ICTM)	619.563.108.140
HSK-A 80	160	80	26	42	80	68	ISO 12164-1 / DIN 69893 / ASME B5.62	619.580.080.160
HSK-A 80	250	80	26	42	80	68	ISO 12164-1 / DIN 69893 / ASME B5.62	619.580.080.250
HSK-A 100	160	100	29	45	100	88	ISO 12164-1 / DIN 69893 / ASME B5.62	619.590.100.160
HSK-A 100	250	100	29	45	100	88	ISO 12164-1 / DIN 69893 / ASME B5.62	619.590.100.250
HSK-A/T 100	160	120	29	100		N/A	ISO 12164-3 (ICTM)	619.590.120.160
HSK-A 125	160	125	29	45	125	111	ISO 12164-1 / DIN 69893 / ASME B5.62	619.592.125.160
HSK-A 25...160	Custom						Contact us with your requirements	619.500.SP
HSK-T 63	140	63	63	26	N/A		ISO 12164-3 (ICTM)	6T9.563.063.140
HSK-T 63	140	108	63	26	36		ISO 12164-3 (ICTM)	6T9.563.108.140
HSK-T 100	160	120	100	29	53		ISO 12164-3 (ICTM)	6T9.590.120.160

HSK-A 80 to 125 Tool Holder Blanks

<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>

Details

HSK-C Tool Holder Blanks

- Contact us for other HSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
- DIN333 Form B center on blank end.

Details PDF (639.525)

Taper	L (mm)	D (mm)	d1 (mm)	f5 (mm)	Standard	Part Number
HSK-C 25	100	25	25	8	ISO 12164-1 / DIN 69893 / ASME B5.62	639.525.025.100
HSK-C 32	100	32	32	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.532.032.100
HSK-C 32	150	50	32	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.532.050.150
HSK-C 40	100	40	40	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.540.040.100
HSK-C 40	200	40	40	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.540.040.200
HSK-C 40	150	63	40	10	ISO 12164-1 / DIN 69893 / ASME B5.62	639.540.063.150
HSK-C 50	100	50	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.050.100
HSK-C 50	200	50	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.050.200
HSK-C 50	100	63	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.063.100
HSK-C 50	200	63	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.063.200
HSK-C 50	175	80	50	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.550.080.175
HSK-C 63	100	63	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.063.100
HSK-C 63	200	63	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.063.200
HSK-C 63	160	80	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.080.160
HSK-C 63	200	80	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.080.200
HSK-C 63	175	100	63	12.5	ISO 12164-1 / DIN 69893 / ASME B5.62	639.563.100.175
HSK-C 80	200	80	80	16	ISO 12164-1 / DIN 69893 / ASME B5.62	639.580.080.200
HSK-C 100	100	100	100	16	ISO 12164-1 / DIN 69893 / ASME B5.62	639.590.100.100
HSK-C25...100 Custom Size					Contact us with your requirements	639.500.SP

HSK-E Tool Holder Blanks

TAC Rockford stocks HSK-E32, HSK-E40, HSK-E50, and HSK-E63 blanks in a variety of diameters and lengths. Other sizes are available
- contact us with your requirements.

Details PDF (659.500)

Taper	L (mm)	D (mm)	f1 (mm)	f2 (mm)	d1 (mm)	d9 (mm)	Standard	Part Number
HSK-E25	100	25	10	20	25	16.4	DIN 69893 / ASME B5.62	659.525.025.100
HSK-E25	100	48	10	20	25	20	DIN 69893 / ASME B5.62	659.525.048.100
HSK-E32	100	32	20	36	32	26	DIN 69893 / ASME B5.62	659.532.032.100
HSK-E40	100	40	20	35	40	34	DIN 69893 / ASME B5.62	659.540.040.100
HSK-E50	100	50	26	42	50	42	DIN 69893 / ASME B5.62	659.550.050.100
HSK-E63	100	63	26	42	63	53	DIN 69893 / ASME B5.62	659.563.063.100
HSK-E25...80 Custom Size							Contact us with your requirements	659.500.SP

HSK-F Tool Holder Blanks

TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.

Details PDF (669.500)

Taper	L	D	f1 (mm)	f2 (mm)	d1 (mm)	d9 (mm)	Standard	Part Number
HSK-F63	100	63	26	42	63	53	DIN 69893 / ASME B5.62	669.563.063.100
HSK-F40...80 Custom Size							Contact us with your requirements	669.500.SP

Steep Taper (MAS 403 BT) Tool Holder Blanks

30, 40, and 50 steep taper MAS 403 BT blanks are available from TAC Rockford.

Details PDF (679.500)

Taper	L (mm)	D (mm)	d5 (mm)	f (mm)	Standard	Part Number
Steep Taper 30 (BT)	100	45	46	20	JIS B 6339 / ISO 7388-2	679.530.045.100
Steep Taper 40 (BT)	160	63	63	25	JIS B 6339 / ISO 7388-2	679.540.063.160
Steep Taper 40 (BT)	250	63	63	25	JIS B 6339 / ISO 7388-2	679.540.063.250
Steep Taper 50 (BT)	160	90	100	35	JIS B 6339 / ISO 7388-2	679.550.090.160
Steep Taper 50 (BT)	250	90	100	35	JIS B 6339 / ISO 7388-2	679.550.090.250
Steep Taper 30/35/40/45/50/55/60 (BT) Custom Size					Contact us with your requirements	679.500.SP

Steep Taper (DIN69871) Tool Holder Blanks

Details PDF (689.500)

Taper	L (mm)	D (mm)	d8 (mm)	f2 (mm)	Standard	Part Number
Steep Taper SK30 (DIN)	100	45	45	35	DIN 69871 / ISO 7388-1	689.530.045.100
Steep Taper SK40 (DIN)	160	63	50	35	DIN 69871 / ISO 7388-1	689.540.063.160
Steep Taper SK40 (DIN)	250	63	50	35	DIN 69871 / ISO 7388-1	689.540.063.250
Steep Taper SK45 (DIN)	160	80	63	35	DIN 69871 / ISO 7388-1	689.545.080.160
Steep Taper SK50 (DIN)	160	90	80	35	DIN 69871 / ISO 7388-1	689.550.090.160
Steep Taper SK50 (DIN)	250	90	80	35	DIN 69871 / ISO 7388-1	689.550.090.250
Steep Taper SK30/40/45/50/60 (DIN) Custom Size					Contact us with your requirements	689.500.SP

BT-DC Steep Taper Tool Holder Blanks

40 and 50 steep taper BT Dual Contact blanks are available from TAC Rockford.

Details PDF (6F9.500)

Taper	L (mm)	D (mm)	d6 (mm)	f2 (mm)		Part Number
Steep Taper (BT-DC) 30	100	52	46	22		6F9.530.052.100
Steep Taper (BT-DC) 40	160	63	63	27		6F9.540.063.160
Steep Taper (BT-DC) 40	250	63	63	27		6F9.540.063.250
Steep Taper (BT-DC) 50	160	90	100	38		6F9.550.090.160
Steep Taper (BT-DC) 50	250	90	100	38		6F9.550.090.250
Steep Taper (BT-DC) 30/40/50 Custom Size					Contact us with your requirements	6F9.500.SP

HSK-B Tool Holder Blanks

Details PDF (629.500)

	Gauge Length	Diameter						Part Number
HSK-B40/50/63/80/100/125/160	Custom Size	Contact us with your requirements						629.500.SP

HSK-D Tool Holder Blanks

Details PDF (649.500)

	Gauge Length	Diameter						Part Number
HSK-D40/50/63/80/100/125/160	Custom Size	Contact us with your requirements						649.500.SP

PSC/PSK Tool Holder Blanks

- Contact us for other PSK sizes, diameters, lengths, and other special requirements.

- Taper on standard blanks is finish hardened; blank portion not hardened.

Details PDF (6C9.500)

Taper	L (mm)	D (mm)	d1 (mm)	Standard	Part Number
PSC / PSK 32 (C3)	90	32	32	ISO 26623-1	6C9.503.032.090
PSC / PSK 32 (C3)	90	60	32	ISO 26623-1	6C9.503.060.090
PSC / PSK 40 (C4)	120	40	40	ISO 26623-1	6C9.504.040.120
PSC / PSK 40 (C4)	165	60	40	ISO 26623-1	6C9.504.060.165
PSC / PSK 40 (C4)	75	80	40	ISO 26623-1	6C9.504.080.075
PSC / PSK 50 (C5)	120	80	40	ISO 26623-1	6C9.504.080.120
PSC / PSK 50 (C5)	150	50	50	ISO 26623-1	6C9.505.050.150
PSC / PSK 50 (C5)	175	75	50	ISO 26623-1	6C9.505.075.175
PSC / PSK 50 (C5)	150	91	50	ISO 26623-1	6C9.505.091.150
PSC / PSK 63 (C6)	180	63	63	ISO 26623-1	6C9.506.063.180
PSC / PSK 63 (C6)	120	110	63	ISO 26623-1	6C9.506.110.120
PSC / PSK 63 (C6)	180	120	63	ISO 26623-1	6C9.506.120.180
PSC / PSK 80 (C8)	200	80	80	ISO 26623-1	6C9.508.080.200
PSC / PSK 80 (C8)	160	115	80	ISO 26623-1	6C9.508.115.160
PSC / PSK (C3/4/5/6/8) Custom Size				Contact us with your requirements	6C9.500.SP

KM Tool Holder Blanks

Details PDF (6K9.500)

Taper	Gauge Length	Diameter						Part Number
KM32/40/50/63/80	Custom Size	Contact us with your requirements						6K9.500.SP

Non-Standard HSK Tool Holder Blanks

At TAC Rockford, we understand that not all machines utilize standard HSK interfaces. That's why we offer a comprehensive service for supplying customized blanks designed for non-standard HSK tool holders.

Our experienced team is familiar with many non-standard HSK interfaces. Contact TAC Rockford today with your photos and drawings, and let us put our expertise to work for you! We're confident we can supply the unusual blank that you need.

Details PDF (6W9.500)

Taper	Gauge Length	Diameter						Part Number
HSK-A63 Taper / HSK-A80 Flange	Custom Size	Contact us with your requirements						619.586.SP
HSK85 (Weinig)	Custom Size	Contact us with your requirements						6W9.500.SP

Steep Taper (CAT/ANSI) Tool Holder Blanks

Details

	L (inch)	D (inch)	d9 (inch)	f2 (inch)	Standard	Part Number
Steep Taper 40 (CAT/ANSI)	6.30	2.48	2.500	1.38	ASME B5.50-2015	699.540.063.160
Steep Taper 50 (CAT/ANSI)	6.30	3.54	3.875	1.38	ASME B5.50-2015	699.550.090.160
Steep Taper 30/40/45/50/60 (CAT/ANSI) Custom Size					Contact us with your requirements	699.500.SP

Tool Holder Blanks

Your comments about this page