410.124.1
HSK Tool Holder Taper Inspection Gauge
Designed to detect tool holder taper wear in seconds.
Maintain machining accuracy and extend spindle life with our high-precision Taper Inspection Gauge. Designed for the machine shop floor, this system allows operators to identify critical taper wear and deformation before it leads to scrapped parts or costly spindle damage.
Rapid Diagnostics: Verify tool holder integrity in seconds with a simple, repeatable process.
High Resolution: Compatible with 8mm stem indicators. Indicators not included: resolutions of 0.001mm, 0.0005mm, or 0.00005" available from TAC Rockford.
Portable: Includes two heavy-duty Fixture Bases and a custom-fitted carrying case to keep your precision instruments protected in industrial environments.
Flexible Calibration: While the 410.148 Certified Taper Master is recommended, the system is designed to work with a "known good" tool holder for quick shop-floor referencing.
Additional product information can be found on the Details tab below.
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
High Precision HSK Gauge Masters
To check the extremely small tolerances required by the DIN and ISO
standards for HSK tool holders.
| HSK-A/C/E Taper | HSK-B/D/F Taper | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | HSK-B/D/F 32 | 410.145.125.000 | ||||||
| HSK-A/C/E 32 | HSK-B/D/F 40 | 410.145.132.000 | ||||||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 410.145.140.000 | ||||||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 410.145.150.000 | ||||||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 410.145.163.000 | ||||||
| HSK-A/C/E 80 | HSK-B/D/F 100 | 410.145.180.000 | ||||||
| HSK-A/C/E 100 | HSK-B/D/F 125 | 410.145.190.000 |
Available for all HSK tool holder sizes (25, 32, 40, 50, 63, 80, 100, 125, 160)
The HSK tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying that tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper.
An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master.
For more information regarding this item (HSK Tool Holder Taper Inspection Gauge) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Tool Holder Taper Inspection Gauge
Designed to detect tool holder taper wear in seconds.
Maintain machining accuracy and extend spindle life with our high-precision Taper Inspection Gauge. Designed for the machine shop floor, this system allows operators to identify critical taper wear and deformation before it leads to scrapped parts or costly spindle damage.
<b>Rapid Diagnostics:</b> Verify tool holder integrity in seconds with a simple, repeatable process.
<b>High Resolution:</b> Compatible with 8mm stem indicators. <b>Indicators not included:</b> resolutions of 0.001mm, 0.0005mm, or 0.00005" available from TAC Rockford.
<b>Portable:</b> Includes two heavy-duty Fixture Bases and a custom-fitted carrying case to keep your precision instruments protected in industrial environments.
<b>Flexible Calibration:</b> While the 410.148 Certified Taper Master is recommended, the system is designed to work with a "known good" tool holder for quick shop-floor referencing.
<b>Additional product information can be found on the Details tab below.</b>
Submit your feedback