355.611.080.000

HSK-A/C80 Manual Clamping Cartridge KS80-09

HSK-A/C80 Manual Clamping Cartridge KS80-09

Zoom Enlarge Image

HSK-A/C80 Manual Clamping Cartridge KS80-09

Available HSK-C 32, 40, 50, 63, 80, 100

Full Data Sheet (687.KS)

PDF Data Sheet: KS Clamping Cartridges (Standard) (687.KS)


HSK Taper Hex Key Size Tighten To Part Number
HSK-A/C 32       3 mm    6 Nm      355.611.032.000
HSK-A/C 40       3 mm    7 Nm      355.611.040.000
HSK-A/C 50       4 mm    15 Nm      355.611.050.000
HSK-A/C 63       5 mm    20 Nm      355.611.063.000
HSK-A/C 80      6 mm    30 Nm      355.611.080.000
HSK-A/C 100       8 mm    50 Nm      355.611.090.000

KS Assembly Spanners

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-A/C80 Manual Clamping Cartridge KS80-09) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

KS Clamping Cartridges (Standard)
KS Clamping Cartridges (Standard)

Available HSK-C 32, 40, 50, 63, 80, 100

KS Clamping Cartridges for Minimal Lubrication (MLC)
KS Clamping Cartridges for Minimal Lubrication (MLC)

Available for HSK-C 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

BERG Pallet Holding Force Gauges
BERG Pallet Holding Force Gauges

Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

TRIBOS SVP-2 Manual Pump Clamping Device
TRIBOS SVP-2 Manual Pump Clamping Device

Design with manual pump for quick actuation and frequent tool changes.

TRIBOS SVP-2 Assembly and Operating Manual
TRIBOS SVP-2 Assembly and Operating Manual

Design with manual pump for quick actuation and frequent tool changes.

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

KS Adapter Flanges with Radial Alignment
KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

Page loaded in 0.1878 seconds.