461.200.K90.000
ForceCheck KM100 Measuring Bar
Product | ForceCheck |
Part Type | Measuring Bar |
Taper / Standard | KM |
Taper Size | 100 |
Part Number | ||||||||
---|---|---|---|---|---|---|---|---|
KM 32 | 461.200.K32.000 | |||||||
KM 40 | 461.200.K40.000 | |||||||
KM 50 | 461.200.K50.000 | |||||||
KM 63 | 461.200.K63.000 | |||||||
KM4X 63 | 461.200.K63.04B | |||||||
KM 6350 | 461.200.K65.000 | |||||||
KM 80 | 461.200.K80.000 | |||||||
KM 100 | 461.200.K90.000 | |||||||
KM4X 100 | 461.200.K90.04B | |||||||
KM 10080 | 461.205.K98.000 |
For more information regarding this item (ForceCheck KM100 Measuring Bar) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Steep Taper (DIN) Drawbar Force Gauges
Measuring bars, complete sets, and base sets for Steep Taper (SK) DIN standard. Metric or inch retention knob / pull-stud threading available on each measuring bar.
Steep Taper (CAT/ANSI) Drawbar Force Gauges
Measuring bars, complete sets, and base sets for Steep Taper (SK) CAT-ANSI. Metric or inch retention knob / pull-stud threading available on each measuring bar.
Senso 3000 Hydraulic Tool Holder Force Gauge
The SENSO 3000 is a specialized tool for verifying correct operation of hydraulic tool holders. For workholding collet force gauges, please see our ForceCheck collet force gauges. SENSO 3000 determines the clamping force of the hydraulic chuck via a pressure sensitive plug gauge. The entire length of the plug gauge is clamped in the hydraulic chuck so that when tightening the clamping screw the clamping pressure of the chuck is optimally applied. The clamping force measuring instrument displays the clamping force as an absolute measurement value on the one hand and as a percentage clamping force in relation to a reference value that can be set individually on the other. This way, SENSO 3000 can be adapted to customer specific application conditions and requirements. The clamping force measuring instrument is supplied with a plug gauge for the respective clamping diameter as well as a carbide proofing bar for calibration purposes and a CR 2430 type battery – all in a sturdy and handy case.
Collet Force Gauges
<b>The original ForceCheck collet force gauge has been replaced by application-specific versions. </b> <br> <b>For hydraulic tool holders and milling chucks:</b><br> <a href="https://tacrockford.com/product/gauges/force-check/hydraulic-tool-holder-force-gauges/">Series 495.250 ForceCheck Hydraulic Tool Holder Force Gauges</a> <br><br> <b>For workholding collets:</b><br> <a href="https://tacrockford.com/product/gauges/workholding/forcecheck-worholding-collet-force-gauge/">Series 495.245 ForceCheck Workholding Collet Force Gauge</a> <br><br> With the ForceCheck collet force gauge, the clamping forces on collets and hydraulic tool holders can be measured to obtain accurate machining specifications while fulfilling ISO standard requirements. Available in complete sets for 1/4, 1/2, 3/4, 1, 10 mm, 16 mm, 20 mm, 25 mm and other diameters. The ForceCheck collet force gauge allows tool holder and workholding collet holding force to be quickly and easily measured. <br><br> Because it is problematic to measure, this critical holding force is typically not checked, even though it plays an important role in manufacturing repeatability. <br><br> TAC Rockford, makers of the ForceCheck drawbar clamping measurement system, offers a simple, efficient, and consistently accurate collet force measurement unit. <br><br> With this system you can accurately and consistently measure the clamping forces on collets and hydraulic tool holders to obtain accurate machining specifications while fulfilling your company's or customer's ISO standard requirements. <br><br> Complete sets include a durable display with standard 9 volt battery, connecting cable, carrying case, and measuring bar. <br><br> Individual measuring bars for any size diameter are available.
HSK Taper Wired Force Measuring Bars
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
HSK Taper Wireless Force Measuring Bars
Wireless measuring adapters have the option of coming with or without the tool change groove. Wireless adapters can be retrofitted for quick inspection or designed for integrated use; ask us more for details.
Kennametal (KM Taper) Drawbar Force Gauges
Measuring bars, complete sets, and base units for measuring drawbar force on a Kennametal KM spindle.
Chuck Force Gauges - Wired
Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.