683.510.060.080
HSK-C 80 VDI to HSK-C Basic Adapter Flanges
Converts VDI DIN 69880-1 to HSK-C
Full Data Sheet (683.510)
PDF Data Sheet: VDI to HSK-C Basic Adapter Flanges (683.510)| Product | Tool Holder |
| Part Type | Adapter Flange |
| Taper / Standard | HSK-C |
| Taper Size | 80 |
| DIN 69880-1 (VDI) | 60 |
| Length (l1) | 100 |
| d2 | 123 |
| l2 | 62 |
| SW | 6 |
| HSK-C Taper (d1) | DIN 69880-1 (VDI) | Length (l1) | d2 | l2 | SW | Part Number | ||
|---|---|---|---|---|---|---|---|---|
| HSK-C 63 | 40 | 80 | 83 | 50 | 5 | 683.510.040.063 | ||
| HSK-C 63 | 50 | 80 | 98 | 50 | 5 | 683.510.050.063 | ||
| HSK-C 80 | 50 | 100 | 98 | 70 | 6 | 683.510.050.080 | ||
| HSK-C 80 | 60 | 100 | 123 | 62 | 6 | 683.510.060.080 | ||
| HSK-C 100 | 60 | 125 | 123 | 87 | 8 | 683.510.060.100 |
For more information regarding this item (HSK-C 80 VDI to HSK-C Basic Adapter Flanges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
VDI to HSK-C Basic Adapter Flanges
- For fixed, centered tools
- Includes clamping set
- Includes brass locking ring
HSK-C Locking Rings for Adapter Flanges
Available for HSK-C 25, 32, 40, 50, 63, 80, 100
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
VDI Lathe Turret Alignment Bars
Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard.
465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information.
Contact us for other sizes or special requirements/configurations.
Workbench Tool Mounting Fixtures
682.126 mounting fixtures have been discontinued. Link below for available alternatives.
Mounting unit partially pre-assembled, aluminum body, holding sleeve, swivel unit and clamping elements. Available for HSK, Capto PSK (PSC), Steep Taper (SK), and VDI.
KS Adapter Flanges with Angular Alignment
For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.
ISO Taper HSK Basic Adapter Flanges for Spindles to DIN 2079
- Includes clamping set for conventional cooling
- Includes retention screws
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
KS Adapter Flanges with Radial Alignment
Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.
Submit your feedback