590.560.941.900 Steep Taper (CAT/ANSI) 60 (CAT/ANSI) Gauge Retention Knobs

Steep Taper (CAT/ANSI) 60 (CAT/ANSI) Gauge Retention Knobs

Retention knobs / pull studs for CAT/ANSI (ASME) B5.50 "V" Flange taper gauges

Use a CAT/ANSI (ASME) B5.50 Standard "V" taper gauge in steep taper spindles.

Steep Taper (CAT/ANSI) 60 (CAT/ANSI) Gauge Retention Knobs (Click image to enlarge)

Product	Accessory
Part Type	Retention Knob
Taper / Standard	Steep Taper (CAT/ANSI)
Taper Size	60
Angle (G)	45 deg.
Length (B)	1.08"
Thread	1.25"-7
Type / Adapter Knob	CAT/ANSI (ASME) B5.50

Taper	Length (B)	Angle (G)	Thread	Type / Adapter Knob	Part Number
Steep Taper (CAT/ANSI) 30	0.32"	45 deg.	M12	DIN 30 Gauge >> CAT 30 Spindle	590.530.940.800
Steep Taper (CAT/ANSI) 30	0.32"	45 deg.	1/2"-13	CAT/ANSI (ASME) B5.50	590.530.940.900
Steep Taper (CAT/ANSI) 40	14.02	45 deg.	M16	BT 40 Gauge >> CAT 40 Spindle	590.540.940.700-14.02mm
Steep Taper (CAT/ANSI) 40	0.44"	45 deg.	M16	DIN 40 Gauge >> CAT 40 Spindle	590.540.940.800
Steep Taper (CAT/ANSI) 40	0.44"	45 deg.	5/8"-11	CAT/ANSI (ASME) B5.50	590.540.940.900
Steep Taper (CAT/ANSI) 50	0.70"	45 deg.	M24	DIN 50 Gauge >> CAT 50 Spindle	590.550.940.800
Steep Taper (CAT/ANSI) 50	0.70"	45 deg.	1"-8	CAT/ANSI (ASME) B5.50	590.550.940.900
Steep Taper (CAT/ANSI) 60	1.08"	45 deg.	M30	DIN 60 Gauge >> CAT 60 Spindle	590.560.941.800
Steep Taper (CAT/ANSI) 60	1.08"	45 deg.	1.25"-7	CAT/ANSI (ASME) B5.50	590.560.941.900

For more information regarding this item (Steep Taper (CAT/ANSI) 60 (CAT/ANSI) Gauge Retention Knobs) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Steep Taper (CAT/ANSI) Gauge Retention Knobs

Use a CAT/ANSI (ASME) B5.50 Standard "V" taper gauge in steep taper spindles.

Steep Taper (CAT/ANSI) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (SK) CAT-ANSI. Metric or inch retention knob / pull-stud threading available on each measuring bar.