Special Application Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges
355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.
HSK Manual Clamping Grippers with Axial Drive
The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.
| HSK-A | HSK-B | Key Size | Torque | Force | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 32 | HSK-B/D/F 40 | 3 | 6 Nm | 12 kN | 685.AXS.032.B00 | |||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 4 | 11 Nm | 16 kN | 685.AXS.040.B00 | |||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 5 | 18 Nm | 24 kN | 685.AXS.050.B00 | |||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 6 | 24 Nm | 30 kN | 685.AXS.063.B00 | |||
| HSK-A/C/E 80 | HSK-B/D/F 100 | - | - | - | 685.AXS.080.B00 | |||
| HSK-A/C/E 100 | HSK-B/D/F 125 | - | - | - | 685.AXS.100.B00 |
HSK Axial-Clamping Manual Clamping Grippers
The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa
- the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.
Submit your feedback