639.563.100.175

HSK-C Tool Holder Blanks - HSK-C 63

- Contact us for other HSK sizes, diameters, lengths, and other special requirements. - Taper on standard blanks is finish hardened; blank portion not hardened. - DIN333 Form B center on blank end.

HSK-C Tool Holder Blanks (Click image to enlarge)
HSK-C Tool Holder Blanks (Click image to enlarge)

Full Data Sheet (639.525)

PDF Data Sheet: HSK-C Tool Holder Blanks (639.525)

Product Tool Holder
Part Type Blank
Taper / Standard HSK-C
Taper Size 63
D (mm) 100
L (mm) 175
d1 (mm) 63
f5 (mm) 12.5
Standard ISO 12164-1 / DIN 69893 / ASME B5.62


Taper L (mm) D (mm) d1 (mm) f5 (mm) Standard Part Number
HSK-C25...100 Custom Size               Contact us with your requirements  639.500.SP
HSK-C 25   100  25  25  8      ISO 12164-1 / DIN 69893 / ASME B5.62   639.525.025.100
HSK-C 32   100  32  32  10      ISO 12164-1 / DIN 69893 / ASME B5.62   639.532.032.100
HSK-C 32   150  50  32  10      ISO 12164-1 / DIN 69893 / ASME B5.62   639.532.050.150
HSK-C 40   100  40  40  10      ISO 12164-1 / DIN 69893 / ASME B5.62   639.540.040.100
HSK-C 40   200  40  40  10      ISO 12164-1 / DIN 69893 / ASME B5.62   639.540.040.200
HSK-C 40   150  63  40  10      ISO 12164-1 / DIN 69893 / ASME B5.62   639.540.063.150
HSK-C 50   100  50  50  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.550.050.100
HSK-C 50   200  50  50  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.550.050.200
HSK-C 50   100  63  50  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.550.063.100
HSK-C 50   200  63  50  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.550.063.200
HSK-C 50   175  80  50  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.550.080.175
HSK-C 63   100  63  63  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.563.063.100
HSK-C 63   200  63  63  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.563.063.200
HSK-C 63   160  80  63  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.563.080.160
HSK-C 63   200  80  63  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.563.080.200
HSK-C 63  175  100  63  12.5      ISO 12164-1 / DIN 69893 / ASME B5.62   639.563.100.175
HSK-C 80   200  80  80  16      ISO 12164-1 / DIN 69893 / ASME B5.62   639.580.080.200
HSK-C 100   100  100  100  16      ISO 12164-1 / DIN 69893 / ASME B5.62   639.590.100.100

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-C Tool Holder Blanks - HSK-C 63) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-T Tool Holder Blanks
HSK-T Tool Holder Blanks

HSK-T tool holder blanks made to ICTM standard / ISO 12164-3

HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.

HSK-A 80 to 125 Tool Holder Blanks
HSK-A 80 to 125 Tool Holder Blanks

<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>

HSK-F Tool Holder Blanks
HSK-F Tool Holder Blanks

TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.

HSK-A Tool Holder Blanks
HSK-A Tool Holder Blanks

TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.

Non-Standard HSK Tool Holder Blanks
Non-Standard HSK Tool Holder Blanks

At TAC Rockford, we understand that not all machines utilize standard HSK interfaces. That's why we offer a comprehensive service for supplying customized blanks designed for non-standard HSK tool holders.



Our experienced team is familiar with many non-standard HSK interfaces. Contact TAC Rockford today with your photos and drawings, and let us put our expertise to work for you! We're confident we can supply the unusual blank that you need.

HSK-C Tool Holder Blanks
HSK-C Tool Holder Blanks

- Contact us for other HSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
- DIN333 Form B center on blank end.

HSK-E Tool Holder Blanks
HSK-E Tool Holder Blanks

TAC Rockford stocks HSK-E32, HSK-E40, HSK-E50, and HSK-E63 blanks in a variety of diameters and lengths. Other sizes are available
- contact us with your requirements.

PSC/PSK Tool Holder Blanks
PSC/PSK Tool Holder Blanks


- Contact us for other PSK sizes, diameters, lengths, and other special requirements.

- Taper on standard blanks is finish hardened; blank portion not hardened.

Page loaded in 0.6187 seconds.