461.310.125.000
ForceCheck HSK-A/C/E 25 Complete Set
Full Data Sheet (462.130)
PDF Data Sheet: HSK Drawbar Force Gauge Complete Sets, Wired (462.130)| Product | ForceCheck |
| Part Type | Complete Set |
| Taper / Standard | HSK-A/C/E |
| Taper Size | 25 |
| ForceCheck Complete Set | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | Complete Set | 461.310.125.000 | ||||||
| HSK-A/C/E 32 | HSK-B/D/F 40 | Complete Set | 461.310.132.000 | |||||
| HSK-A/C/E 40 | HSK-B/D/F 50 | Complete Set | 461.310.140.000 | |||||
| HSK-A/C/E 50 | HSK-B/D/F 63 | Complete Set | 461.310.150.000 | |||||
| HSK-A/C/E 63 | HSK-B/D/F 80 | Complete Set | 461.310.163.000 | |||||
| HSK-A/C/E 80 | HSK-B/D/F 100 | Complete Set | 461.310.180.000 | |||||
| HSK-A/C/E 100 | HSK-B/D/F 125 | Complete Set | 461.310.190.000 | |||||
| HSK-A/C/E 125 | Complete Set | 461.310.192.000 | ||||||
| HSK-A/C/E 160 | Complete Set | 461.310.196.000 |
For more information regarding this item (ForceCheck HSK-A/C/E 25 Complete Set) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
ER Collet Taper Plug Gauge Carrying Case
For holding a complete set: ER11, 16, 20, 25, 32, 40 (Gauges not included). Can be customized upon request.
HSK Drawbar Force Gauge Complete Sets, Wired
Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.
HSK Taper Drawbar Force Gauges
Measuring bars, complete sets, and base sets for all HSK type spindles. Contact us for other wireless and carrying case options.
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
Submit your feedback