683.4329.025.100

HSK-A 100 Side Lock Holders (Weldon Side)

Zoom Enlarge Image

HSK-A 100 Side Lock Holders (Weldon Side)

Available for 32, 40, 50, 63, 80, 100

Full Data Sheet (683.329)

PDF Data Sheet: HSK-A Side Lock Holders (Weldon Side) (683.329)

Details Ask a Question Request a Quote

Product	Tool Holder
Part Type	Weldon Side Lock
Taper / Standard	HSK-A
Taper Size	100
Ø (d1)	25
Length (l1)	100

Taper (d3)	Length (l1)	Ã˜ (d1)	Part Number
HSK-A 32	60	6	683.4329.006.032
HSK-A 40	60	6	683.4329.006.040
HSK-A 50	65	6	683.4329.006.050
HSK-A 63	65	6	683.4329.006.063
HSK-A 80	80	6	683.4329.006.080
HSK-A 100	80	6	683.4329.006.100
HSK-A 32	60	8	683.4329.008.032
HSK-A 40	60	8	683.4329.008.040
HSK-A 50	65	8	683.4329.008.050
HSK-A 63	65	8	683.4329.008.063
HSK-A 80	80	8	683.4329.008.080
HSK-A 100	80	8	683.4329.008.100
HSK-A 32	65	10	683.4329.010.032
HSK-A 40	60	10	683.4329.010.040
HSK-A 50	65	10	683.4329.010.050
HSK-A 63	65	10	683.4329.010.063
HSK-A 80	80	10	683.4329.010.080
HSK-A 100	80	10	683.4329.010.100
HSK-A 32	65	12	683.4329.012.032
HSK-A 40	70	12	683.4329.012.040
HSK-A 50	80	12	683.4329.012.050
HSK-A 63	80	12	683.4329.012.063
HSK-A 80	80	12	683.4329.012.080
HSK-A 100	80	12	683.4329.012.100
HSK-A 40	75	14	683.4329.014.040
HSK-A 50	80	14	683.4329.014.050
HSK-A 63	80	14	683.4329.014.063
HSK-A 80	80	14	683.4329.014.080
HSK-A 100	80	14	683.4329.014.100
HSK-A 40	75	16	683.4329.016.040
HSK-A 50	80	16	683.4329.016.050
HSK-A 63	80	16	683.4329.016.063
HSK-A 80	100	16	683.4329.016.080
HSK-A 100	100	16	683.4329.016.100
HSK-A 50	80	18	683.4329.018.050
HSK-A 63	80	18	683.4329.018.063
HSK-A 80	100	18	683.4329.018.080
HSK-A 100	10	18	683.4329.018.100
HSK-A 50	80	20	683.4329.020.050
HSK-A 63	80	20	683.4329.020.063
HSK-A 80	100	20	683.4329.020.080
HSK-A 100	100	20	683.4329.020.100
HSK-A 63	110	25	683.4329.025.063
HSK-A 80	100	25	683.4329.025.080
HSK-A 100	100	25	683.4329.025.100
HSK-A 63	110	32	683.4329.032.063
HSK-A 80	110	32	683.4329.032.080
HSK-A 100	100	32	683.4329.032.100
HSK-A 80	120	40	683.4329.040.080
HSK-A 100	110	40	683.4329.040.100

For more information regarding this item (HSK-A 100 Side Lock Holders (Weldon Side)) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK-A Side Lock Holders (Weldon Side)

Available for 32, 40, 50, 63, 80, 100

HSK-A Side Lock Holders (Whistle Notch)

Available for HSK-A 32, 40, 50, 63, 80, 100

HSK-C Side Lock Holders

Available for 32, 40, 50, 63

Heat Exchangers

These cooling systems facilitate the cooling of oils and other media (with BKW equipment even contaminated media). Water is supplied at the front inlet side from the internal side of the tubes while the medium to be cooled flows in from the jacket.

Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

Steep Taper (CAT/ANSI) to HSK Adapters

Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).

Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

HDT Tool Clamping Cylinders

HDT pressure intensifiers are primarily designed for tool clamping and chucking systems using stationary hydraulic cylinders of the type HLZ for releasing the tool shanks when no hydraulic unit is available for operating them.

HSK-A Weldon Holders

For end mills with shank DIN 1835-B
- DIN 6535 HB. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.