683.581

HSK-C Front Adapter Flanges

HSK-C Front Adapter Flanges (Click image to enlarge)
HSK-C Front Adapter Flanges (Click image to enlarge)

- Includes clamping set - Includes brass locking ring - Includes indexing pin and retention screw

PDF Data Sheet: HSK-C Front Adapter Flanges (683.581)

Taper (d1) Length (l1) Ø (d2) l2 d3 SW Part Number
HSK-C 25   20.0  45  26.5  23  2.0      683.4581.019.000
HSK-C 32   17.5  55  23.0  28  2.5      683.4581.024.000
HSK-A/C40   22.5  63  29.0  36  3.0      683.4581.030.000
HSK-C 50   27.5  80  36.0  46  4.0      683.4581.038.000
HSK-C 63   35.0  100  46.0  56  5.0      683.4581.048.000
HSK-C 80   45.0  125  58.0  66  6.0      683.4581.060.000
HSK-C 100   57.0  160  72.0  86  8.0      683.4581.075.000

Product Information • The interface between spindle and flange must be taken into consideration for the transferable torsional moment.

Scope of Delivery • Includes clamping set
• Includes brass locking ring
• Includes indexing pin and retention screw


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-C Front Adapter Flanges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

KS Adapter Flanges
KS Adapter Flanges

Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100

HSK-C Locking Rings for Adapter Flanges
HSK-C Locking Rings for Adapter Flanges

Available for HSK-C 25, 32, 40, 50, 63, 80, 100

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges for Short Spindles
KS Adapter Flanges for Short Spindles

With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.

HSK Manual Clamping Grippers with Axial Drive
HSK Manual Clamping Grippers with Axial Drive

The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

KS Adapter Flanges with Radial Alignment
KS Adapter Flanges with Radial Alignment

Used for fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded-pins (for alignment) on the machine spindle and on HSK or SK adapters.

PSK/PSC Adaptor Flanges
PSK/PSC Adaptor Flanges

Capto (Polygonal Taper) adapter flanges are a one-piece design available for C3, C4, C5, C6, C8 PSC tapers. Ideal for tool holder blank building or other mounting capabilities with the Coromant Capto tool holder system.

Page loaded in 0.1227 seconds.