681.003.1331

Laip Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters

For tools with DIN 2080, DIN 69871 or MAS 403 BT tapers

Laip Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters (Click image to enlarge)
Laip Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters (Click image to enlarge)

For tools with Steep Taper DIN 2080, DIN 69871, or MAS 403 BT.

PDF Data Sheet: Laip Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters (681.003.1331)

DIN 69871 Taper (K) Steep Taper (K1) D G Length (L) Part Number
Steep Taper 50     Steep Taper 40  70  M-16    51    681.00313310402

• Maximum circular deviation between K and K1 <= 0.008
• Pull stud necessary to use Steep Taper (DIN 2080) shanks
• Pull stud necessary to use Steep Taper (DIN 69871) and MAS 403 BT shanks
• Pull studs are supplied on request


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Laip Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080) Reducing Adapters
Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080) Reducing Adapters

Converts Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080)

Steep Taper (MAS 403 BT) to Steep Taper (ISO) Reducing Adapters
Steep Taper (MAS 403 BT) to Steep Taper (ISO) Reducing Adapters

For tools with Steep Taper DIN 2080, DIN 69871 or MAS 403 BT.

Steep Taper to Steep Taper (MAS 403 BT) Reducing Adapters
Steep Taper to Steep Taper (MAS 403 BT) Reducing Adapters

With double effect pull stud. For tools with Steep Taper (DIN 69871) or Steep Taper (MAS 403 BT).

Steep Taper (DIN) to HSK-A/C Adapters
Steep Taper (DIN) to HSK-A/C Adapters

For converting Steep Taper (DIN 69871) to HSK-A/C. Prepared for MAPAL clamping systems.

Steep Taper (DIN) to HSK Adapters
Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

Steep Taper (CAT/ANSI) to HSK Adapters
Steep Taper (CAT/ANSI) to HSK Adapters

Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).

Page loaded in 0.1651 seconds.