461.310.K90.000

ForceCheck KM100 Complete Set

KM50 & KM63 ForceCheck Sensors with display, cable and case

KM80 ForceCheck, Drawbar Force Sensor (Click image to enlarge)

PDF Data Sheet: Kennametal (KM Taper) Complete Sets (462.K30)

Product	ForceCheck
Part Type	Complete Set
Taper / Standard	KM
Taper Size	100

KM Taper								Part Number
KM 63			Complete Set					461.310.K63.000
KM 100			Complete Set					461.310.K90.000

For more information regarding this item (ForceCheck KM100 Complete Set) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

ER Collet Taper Plug Gauge Carrying Case

For holding a complete set: ER11, 16, 20, 25, 32, 40 (Gauges not included). Can be customized upon request.

Kennametal (KM Taper) Complete Sets

HSK Drawbar Force Gauge Complete Sets, Wired

Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.

Collet Force Gauges

The original ForceCheck collet force gauge has been replaced by application-specific versions. 

For hydraulic tool holders and milling chucks:
<a href="https://tacrockford.com/product/gauges/tool-holder-taper/hydraulic-tool-holder-force-gauges/">Series 495.250 ForceCheck Hydraulic Tool Holder Force Gauges</a>

For workholding collets:
<a href="https://tacrockford.com/product/gauges/workholding/forcecheck-worholding-collet-force-gauge/">Series 495.245 ForceCheck Workholding Collet Force Gauge</a>

With the ForceCheck collet force gauge, the clamping forces on collets and hydraulic tool holders can be measured to obtain accurate machining specifications while fulfilling ISO standard requirements.

Available in complete sets for 1/4, 1/2, 3/4, 1, 10 mm, 16 mm, 20 mm, 25 mm and other diameters.

The ForceCheck collet force gauge allows tool holder and workholding collet holding force to be quickly and easily measured.

Because it is problematic to measure, this critical holding force is typically not checked, even though it plays an important role in manufacturing repeatability.

TAC Rockford, makers of the ForceCheck drawbar clamping measurement system, offers a simple, efficient, and consistently accurate collet force measurement unit.

With this system you can accurately and consistently measure the clamping forces on collets and hydraulic tool holders to obtain accurate machining specifications while fulfilling your company's or customer's ISO standard requirements.

Complete sets include a durable display with standard 9 volt battery, connecting cable, carrying case, and measuring bar.

Individual measuring bars for any size diameter are available.

PSK (PSC) Complete Sets

ForceCheck Workholding Collet Force Gauge

ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.

Applications for ForceCheck workholding collet force gauges include:

-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining

A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.