619.563.108.140 HSK-A63 + HSK-T63 Tool Holder Blank, D1=108, L=140

HSK-A63 Tool Holder Blank

Blank 619.563.108.140 is made to the ITCM HSK-T standard for use in turning machines. ICTM tools have drive keys held to tighter tolerances than HSK-A.

ICTM tools can typically be used on HSK-A machines, however the ICTM HSK-T standard does not require a relief area above the tool change flange, causing possible incompatibility with certain tool changes. If you have questions on the differences, please feel free to contact us.

HSK-A Tool Holder Blanks (Click image to enlarge)

Full Data Sheet (619.525)

PDF Data Sheet: HSK-A Tool Holder Blanks (619.525)

Details Ask a Question Request a Quote

Product	Tool Holder
Part Type	Blank
D (mm)	108
L (mm)	140
f1 (mm)	26
d1 (mm)	63
d9 (mm)	N/A
Standard	ISO 12164-3 (ICTM)

Taper	L (mm)	D (mm)	f1 (mm)	f2 (mm)	d1 (mm)	d9 (mm)	Standard	Part Number
HSK-A 25...160	Custom						Contact us with your requirements	619.500.SP
HSK-A 25	100	25	10	20	25	16.4	ISO 12164-1 / DIN 69893 / ASME B5.62	619.525.025.100
HSK-A 32	120	40	20	35	32	26	ISO 12164-1 / DIN 69893 / ASME B5.62	619.532.040.120
HSK-A 40	100	40	20	35	40	34	ISO 12164-1 / DIN 69893 / ASME B5.62	619.540.040.100
HSK-A 50	100	50	26	42	50	42	ISO 12164-1 / DIN 69893 / ASME B5.62	619.550.050.100
HSK-A 50	160	63	26	42	50	42	ISO 12164-1 / DIN 69893 / ASME B5.62	619.550.063.160
HSK-A 50	200	63	26	42	50	42	ISO 12164-1 / DIN 69893 / ASME B5.62	619.550.063.200
HSK-A 63	100	63	42	63			ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.063.100
HSK-A/T 63	140	63	26	63		N/A	ISO 12164-3 (ICTM)	619.563.063.140
HSK-A 63	200	63	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.063.200
HSK-A 63	160	80	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.080.160
HSK-A 63	250	80	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.080.250
HSK-A 63	250	100	26	42	63	53	ISO 12164-1 / DIN 69893 / ASME B5.62	619.563.100.250
HSK-A/T 63	140	108	26		63	N/A	ISO 12164-3 (ICTM)	619.563.108.140
HSK-A 80	160	80	26	42	80	68	ISO 12164-1 / DIN 69893 / ASME B5.62	619.580.080.160
HSK-A 80	250	80	26	42	80	68	ISO 12164-1 / DIN 69893 / ASME B5.62	619.580.080.250
HSK-A 100	160	100	29	45	100	88	ISO 12164-1 / DIN 69893 / ASME B5.62	619.590.100.160
HSK-A 100	250	100	29	45	100	88	ISO 12164-1 / DIN 69893 / ASME B5.62	619.590.100.250
HSK-A/T 100	160	120	29	100		N/A	ISO 12164-3 (ICTM)	619.590.120.160
HSK-A 125	160	125	29	45	125	111	ISO 12164-1 / DIN 69893 / ASME B5.62	619.592.125.160
HSK-T 63	140	63	63	26	N/A		ISO 12164-3 (ICTM)	6T9.563.063.140
HSK-T 63	140	108	63	26	36		ISO 12164-3 (ICTM)	6T9.563.108.140
HSK-T 100	160	120	100	29	53		ISO 12164-3 (ICTM)	6T9.590.120.160

For more information regarding this item (HSK-A63 + HSK-T63 Tool Holder Blank, D1=108, L=140) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK-A Tool Holder Blanks

TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.

KM Tool Holder Blanks

Weinig Tool Holder Blanks

HSK-C Tool Holder Blanks

- Contact us for other HSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
- DIN333 Form B center on blank end.

HSK-F Tool Holder Blanks

TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.

HSK-E Custom Tool Holder Blank Worksheet

HSK-A 80 to 125 Tool Holder Blanks

<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>

PSC/PSK Tool Holder Blanks

- Contact us for other PSK sizes, diameters, lengths, and other special requirements.

- Taper on standard blanks is finish hardened; blank portion not hardened.