293-GSE
BERG Electromechanical Transfer Rail Couplings
The electro-mechanical gripper rail coupling is designed for automatic coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool. The coupling consists of a hard anodized aluminum housing, an axially movable tensioning rod and an electromechanical self-locking helical gearing. This configuration achieves a very high repeat precision, high clamping forces, and features dynamic rigidity with low mass.
PDF Data Sheet: BERG Electromechanical Transfer Rail Couplings (293-GSE)
For more information regarding this item (BERG Electromechanical Transfer Rail Couplings) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Transfer Rail Couplings
The mechanical self-locking Berg gripper rail coupling GSM is designed for manual coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.
Hydro-mechanical Self-locking Transfer Rail Couplings
The hydromechanical self-locking gripper rail coupling is designed for automatic coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool. The coupling consists of a hard anodized aluminum housing, an axially movable tensioning rod and a hydromechanical self-locking clamping gearing. This configuration allows for high clamping forces and features a very high dynamic rigidity with minimum mass.
Manually Operated Eccentric Cam Style Transfer Rail Couplings
The mechanical self-locking gripper rail coupling is designed for manual coupling of gripper rails on transfer presses. A vertical life-out stroke is required for changing the tool. The coupling consists of a hard anodized aluminum housing, an axially movable tensioning rod and a self-locking eccentric cam gearing. This configuration allows high clamping forces and features a high dynamic rigidity with minimum mass.
Manually Operated Swing-out Style Transfer Rail Couplings
The mechanical self-locking swing-out style gripper rail coupling is designed for manual coupling of gripper rails on transfer presses. A short lift-out stroke is required for changing the tool. An axial stroke is required in the event of additional centering with pins. The coupling consists of a hard anodized aluminum housing, a swiveling tensioning rod and a self-locking eccentric cam gearing. This configuration allows high clamping forces and features a high dynamic rigidity with minimum mass.
Overview: Clamping Systems with AS-Interface
The BERG AS-Interface clamping and chucking systems are intended for clamping various tools/dies on press slides and black holders, and for sliding table clamping and gripper rail couplings on multiple die presses. They are used on new machines and for retrofitting automatic clamping systems in existing press lines.
Stationary Electromechanical Rotational Style Clamping Systems
Electromechanical rotational-style clamp for die clamping on slides and blank-holders. When unclamping, the draw bar rotates 90 degrees.
Stationary Electromechanical Swing-out Style Clamping Systems
Electromechanical swing-out style clamp for die clamping on slides and blank-holders. When unclamping the draw-bar swings out up to 15 degrees maximum.
Stationary Electromechanical Gripper Style Clamping Systems
Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.
Stationary Electromechanical Moving Bolster Clamp Wedgebar Style Clamping Systems
Electromechanical wedgebar style clamp for clamping moving bolsters. When unclamping, the clamping wedge withdraws into the clamp body.
Submit your feedback