TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65
TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc.
Gauges include a certificate showing actual dimensions, as well as a padded carrying case.
Sizes 30, 40, and 50 include a tolerance step for indicating high/low limit.
Manufactured per DIN 2079. For sizes 10, 15, 20, and 25, please provide us with the gauge diameter of the spindle to be inspected.
|Steep Taper 30||430.100.830.000|
|Steep Taper 35||430.100.835.000|
|Steep Taper 40||430.100.840.000|
|Steep Taper 45||430.100.845.000|
|Steep Taper 50||430.100.850.000|
|Steep Taper 55||430.100.855.000|
|Steep Taper 60||430.100.860.000|
|Steep Taper 65||430.100.865.000|
|Steep Taper (ISO) 10||Specify Gauge Diameter and Length||430.100.A10.000|
|Steep Taper (ISO) 15||Specify Gauge Diameter and Length||430.100.A15.000|
|Steep Taper (ISO) 20||Specify Gauge Diameter and Length||430.100.A20.000|
|Steep Taper (ISO) 25||Specify Gauge Diameter and Length||430.100.A25.000|
For more information regarding this item (Steep Taper Spindle Plug Gauges) or other items, fill out the form below
or contact our office directly:
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.
Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65
Series 492.026 ring gauges are for lathe spindle face. Series 492.028 plug gauges are for chuck back side mounting face. Taper gauges can be custom-manufactured to customer specifications. Hard chrome-plate and tungsten carbide gauges also available. Cases are not included. Contact us for high quality gauge crib and travel case options.
TAC Rockford Morse spindle taper gauges are for inspection of Morse spindle tapers. Gauges made from a hardened gauge steel, and include a padded carrying case and certificate. Manufactured per DIN 229.
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.
The four transducers mounted in the measuring ring are used for differential measurement of gauge dimensions d2 and d3. Deviations from the calibrated taper plug gauge are shown on the two indicator columns.