410.124.1
HSK Tool Holder Taper Inspection Gauge
Designed to detect tool holder taper wear in seconds. The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.145 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.
| HSK-A/C/E Taper | HSK-B/D/F | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | HSK-B/D/F 32 | 410.124.125.000 | ||||||
| HSK-A/C/E 32 | HSK-B/D/F 40 | 410.124.132.000 | ||||||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 410.124.140.000 | ||||||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 410.124.150.000 | ||||||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 410.124.163.000 | ||||||
| HSK-A/C/E 80 | HSK-B/D/F 100 | 410.124.180.000 | ||||||
| HSK-A/C/E 100 | HSK-B/D/F 125 | 410.124.190.000 | ||||||
| HSK-A/C/E 125 | HSK-B/D/F 160 | 410.124.192.000 | ||||||
| HSK-A/C/E 160 | 410.124.196.000 |
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
| HSK-A/C/E Taper | HSK-B/D/F Taper | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | HSK-B/D/F 32 | 410.148.125.000 | ||||||
| HSK-A/C/E 32 | HSK-B/D/F 40 | 410.148.132.000 | ||||||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 410.148.140.000 | ||||||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 410.148.150.000 | ||||||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 410.148.163.000 | ||||||
| HSK-A/C/E 80 | HSK-B/D/F 100 | 410.148.180.000 | ||||||
| HSK-A/C/E 100 | HSK-B/D/F 125 | 410.148.190.000 |
High Precision HSK Gauge Masters
To check the extremely small tolerances required by the DIN and ISO standards for HSK tool holders.
| HSK-A/C/E Taper | HSK-B/D/F Taper | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 25 | HSK-B/D/F 32 | 410.145.125.000 | ||||||
| HSK-A/C/E 32 | HSK-B/D/F 40 | 410.145.132.000 | ||||||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 410.145.140.000 | ||||||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 410.145.150.000 | ||||||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 410.145.163.000 | ||||||
| HSK-A/C/E 80 | HSK-B/D/F 100 | 410.145.180.000 | ||||||
| HSK-A/C/E 100 | HSK-B/D/F 125 | 410.145.190.000 |
Available for all HSK tool holder sizes (25, 32, 40, 50, 63, 80, 100, 125)
The HSK tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying that tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper.
The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 410.145 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master.
For more information regarding this item (HSK Tool Holder Taper Inspection Gauge) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
Morse Tool Holder Taper Sleeve Gauges
TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.
HSK Certified Master Taper Gauge
These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.
Tool Holder Taper Sleeve Gauges
Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a> <br><br> <b>Features</b> <ul> <li>Maximize tool life and spindle life</li> <li>Ensure tool holder performance</li> <li>Tool holder can be tested with components assembled, and works with retention knob installed</li> <li>Includes (A) and (B) indicators with 0.0001" resolution</li> <li>Carbide locating pins for long life</li> <li>Made with hardened tool steel body</li> <li>Comes with master shank (C)</li> </ul> <br>
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.
Submit your feedback