355.611.050.000
HSK-A50 Manual Clamping Cartridge KS50-07
Full Data Sheet (687.KS)
PDF Data Sheet: KS Clamping Cartridges (Standard) (687.KS)| HSK Taper | Hex Key Size | Tighten To | Part Number | |||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C 32 | 3 mm | 6 Nm | 355.611.032.000 | |||||
| HSK-A/C 40 | 3 mm | 7 Nm | 355.611.040.000 | |||||
| HSK-A/C 50 | 4 mm | 15 Nm | 355.611.050.000 | |||||
| HSK-A/C 63 | 5 mm | 20 Nm | 355.611.063.000 | |||||
| HSK-A/C 80 | 6 mm | 30 Nm | 355.611.080.000 | |||||
| HSK-A/C 100 | 8 mm | 50 Nm | 355.611.090.000 |
KS Assembly Spanners
Available for HSK-C 32, 40, 50, 63, 80, 100. Also available MLC-cartridges for HSK-C 40, 50, 63, 80, 100.
For more information regarding this item (HSK-A50 Manual Clamping Cartridge KS50-07) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-A Tool Holder Blanks
TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.
KS Clamping Cartridges (Standard)
Available HSK-C 32, 40, 50, 63, 80, 100
KS Clamping Cartridges for Minimal Lubrication (MLC)
Available for HSK-C 40, 50, 63, 80, 100
KS Adapter Flanges with Angular Alignment
Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.
BERG Pallet Holding Force Gauges
Includes measuring case, display unit, measuring cartridge, test certificate, and clamping head specific pull studs
Rear-Clamp Manual Clamping Cartridges
355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.
KS Adapter Flanges
Used for fitting onto machine spindle or in standard SK adapters for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100
TRIBOS SVP-2 Manual Pump Clamping Device
Design with manual pump for quick actuation and frequent tool changes.
TRIBOS SVP-2 Assembly and Operating Manual
Design with manual pump for quick actuation and frequent tool changes.
KS Adapter Flanges for Short Spindles
With radial alignment. Used for fitting into short spindles (DIN 69002) for holding HSK tools. Available for HSK-C 32, 40, 50, 63.
Submit your feedback