694.1740

Machinist Precision Horizontal Levels

Standard horizontal engineer's level per DIN 877

Special cast-iron base with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany.

Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m (contact us for further information).
Levels for large shaft-diameter or with magnetic faces available on request.

Machinist Precision Horizontal Levels (Click image to enlarge)
Wooden Case (Click image to enlarge)

PDF Data Sheet: Machinist Precision Horizontal Levels (694.1740)

Print Data Sheet

Special cast-iron base with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany.

Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m. Contact us for further information.
Levels for large shaft-diameter or with magnetic faces available on request.


Size (mm) Width (mm) Sensitivity (mm/m) Part Number
160   42    0.04          694.1742.101
200   42    0.04          694.1742.102
250   42    0.04          694.1742.103
300   51    0.04          694.1742.104
500   51    0.04          694.1742.105

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Machinist Precision Horizontal Levels) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Machinist Precision Square Levels
Machinist Precision Square Levels

Special cast-iron frame with insulated pads. 4 measuring faces, 3 with V grooves. Longitudinal and lateral vials. Carrying case included. Made in Germany. Additional sensitivities available: 0.3, 0.1, 0.02, and 0.01 mm/m (contact us for further information). Levels for large shaft-diameter or with magnetic faces available on request.

HSK-E Weldon Holders
HSK-E Weldon Holders

The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available to HSK-E 25, 32, 40, 50, 63.

HSK-C Weldon and Whistle-Notch Holders
HSK-C Weldon and Whistle-Notch Holders

The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Available for HSK-C 32, 40, 50, 63.

HSK-A Whistle-Notch Holders
HSK-A Whistle-Notch Holders

For end mills with shank DIN 1835-B and / or DIN 1835-E. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.

HSK-A Weldon Holders
HSK-A Weldon Holders

For end mills with shank DIN 1835-B - DIN 6535 HB. The hole diameter and circular deviation tolerances have been significantly tightened up compared with DIN 1835 in order to achieve the highest levels of machining precision. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-A 32, 40, 50, 63, 80, 100.

Hydrostatic Slides
Hydrostatic Slides

- Very low friction, no friction at positioning - Movement of 0.1 micro-m possible - No reversal backlash of friction force

Power Clamp Nano Heat Shrink Systems
Power Clamp Nano Heat Shrink Systems

The all new Power Clamp Nano is your entry into the world of micro machining. The new shrink fit machine was specifically developed for small interfaces, i.e. HSK 25, HSK 50 and SK/BT 30. The horizontal design ensures easy handling especially at tools with smaller diameters. By its modular system construction Power Clamp Nano fulfills the various customer requirements very well.

NSM-HV Zero Point Clamping System
NSM-HV Zero Point Clamping System

NSM-HV series zero point clamping heads are used for workholding pallet clamping as well as other applications on machine tools. With the clamping heads and matching retention bolts, extremely tight tolerance clamping position repeat precision can be achieved.

Pneumatic Steep Taper Spindle Gauge Kits
Pneumatic Steep Taper Spindle Gauge Kits

Gauging kit for Steep Taper, CAT/ANSI, ISO, BT spindles with pneumatic measuring system. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.

Page loaded in 0.1449 seconds.