492.026.005.000

DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5 Lathe Spindle Face Ring

DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5  Lathe Spindle Face Ring

Zoom Enlarge Image

DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5 Lathe Spindle Face Ring

Series 492.026 ring gauges are for lathe spindle face.

DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5  Lathe Spindle Face Ring (Click image to enlarge)
DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5  Lathe Spindle Face Ring (Click image to enlarge)
DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5  Lathe Spindle Face Ring (Click image to enlarge)

Full Data Sheet (492.020)

PDF Data Sheet: Lathe Spindle Face Ring (492.020)

Product Gauge
Part Type Lathe/Chuck Dimensional
Taper / Standard DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5
Size 5
d2 max. 82.573
d2 min. 82.563
Gauge Ring


Standards Size d2 max. d2 min. Gauge Part Number
DIN55026-3, DIN55027-3, A1-3, A2-3, B1-3, B2-3         3  53.983  53.975  Ring  492.026.003.000
DIN55026-4, DIN55027-4, A1-4, A2-4, B1-4, B2-4         4  63.521  63.513  Ring  492.026.004.000
DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5         5  82.573  82.563  Ring  492.026.005.000
DIN55026-6, DIN55027-6, A1-6, A2-6, B1-6, B2-6         6  106.385  106.375  Ring  492.026.006.000
DIN55026-8, DIN55027-8, A1-8, A2-8, B1-8, B2-8         8  139.731  139.719  Ring  492.026.008.000
DIN55026-11, DIN55027-11, A1-11, A2-11, B1-11, B2-11         11  196.883  196.869  Ring  492.026.011.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (DIN55026-5, DIN55027-5, A1-5, A2-5, B1-5, B2-5 Lathe Spindle Face Ring) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Lathe Spindle Face Ring
Lathe Spindle Face Ring

Series 492.026 ring gauges are for lathe spindle face.

Lathe Spindle Face Ring With Indicator Mounts
Lathe Spindle Face Ring With Indicator Mounts

Series 492.126 ring gauges are for lathe spindle face.

A2 Flanged Lathe Spindle Runout Test Bars
A2 Flanged Lathe Spindle Runout Test Bars

Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.

- Maximum runout error 0.003mm [0.00012 in.]

Drive Key Spindle Gauges
Drive Key Spindle Gauges

When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.

Centro Setup Indicator
Centro Setup Indicator

With the CENTRO, bores and shafts can be easily and precisely centered. The CENTRO is clamped into a tool holder and inserted into the spindle of the milling machine. The machine spindle is then positioned near the bore or shaft that is to be measured, and rotates at low speed.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

For fitting onto the machine spindle or on HSK or ISO adapters for holding HSK tools. Can be precisely set in radial run-out by using threaded pins (for alignment) on the machine spindle and on HSK or ISO adapters. Can be precisely set in face run-out using alignment screws (thrust pad and threaded pin) in the adapter flange. Available for HSK-C 32, 40, 50, 63, 80, 100.

Steep Taper Spindle Gauge Manual
Steep Taper Spindle Gauge Manual

Download PDF for instruction manual.

VDI Lathe Turret Alignment Bars
VDI Lathe Turret Alignment Bars

Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard.

465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information.

Contact us for other sizes or special requirements/configurations.

KS Adapter Flanges with Angular Alignment
KS Adapter Flanges with Angular Alignment

Used for fitting onto machine spindle for holding HSK tools. Available for HSK-C 32, 40, 50, 63, 80, 100.

Page loaded in 0.1117 seconds.