495.200.028.003.LF

D28 (Low Force) Chuck Force Gauges - Wired

D28 (Low Force)  Chuck Force Gauges - Wired

Zoom Enlarge Image

D28 (Low Force) Chuck Force Gauges - Wired

Measures the holding force on turning-centers, chucks, or lathes

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

D28 (Low Force)  Chuck Force Gauges - Wired (Click image to enlarge)
D28 (Low Force)  Chuck Force Gauges - Wired (Click image to enlarge)

Measuring Diameter Jaws Diameter Force Range (per Jaw) Part Number
D28   2 / 3  28 mm / 1.10 in.  0...15kN / 3,400 lb-F          495.200.028.003
D28 (Low Force)   2 / 3  28 mm / 1.10 in.  Contact us          495.200.028.003.LF
D72   2 / 3  72 mm / 2.83 in.  0...50kN / 11,200 lb-F          495.200.072.003
D72 (Low Force)   2 / 3  72 mm / 2.83 in.  Contact us          495.200.072.003.LF
D125   2 / 3 / 4  125 mm / 4.92 in.  0...65kN / 14,600 lb-F          495.200.125.004
D125 (Low Force)   2 / 3 / 4  125 mm / 4.92 in.  Contact us          495.200.125.004.LF
D200   2 / 3 / 4 / 6  200 mm / 7.87 in.  0...100kN / 22,500 lb-F          495.200.200.006
D200 (Low Force)   2 / 3 / 4 / 6  200 mm / 7.87 in.  Contact us          495.200.200.006.LF

ForceCheck Force Gauge Base Set - Wired
ForceCheck Force Gauge Base Set - Wired

Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Details PDF (461.310)

Part Number
ForceCheck Base Set                 461.310.000.000

Chuck Force Sensor Extensions and Accessories
Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

Details PDF (495.800)


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (D28 (Low Force) Chuck Force Gauges - Wired) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Chuck Force Gauges - Wired
Chuck Force Gauges - Wired

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Large Diameter VTL Chuck Force Gauges
Large Diameter VTL Chuck Force Gauges

Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.

ForceCheck Workholding Collet Force Gauge
ForceCheck Workholding Collet Force Gauge

ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.

Applications for ForceCheck workholding collet force gauges include:

-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining


A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.

Machine-Integrated Drawbar Force Gauges
Machine-Integrated Drawbar Force Gauges

The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.

Senso 3000 Hydraulic Tool Holder Force Gauge
Senso 3000 Hydraulic Tool Holder Force Gauge

The SENSO 3000 is a specialized tool for verifying correct operation of hydraulic tool holders. For workholding collet force gauges, please see our ForceCheck collet force gauges.

SENSO 3000 determines the clamping force of the hydraulic chuck via a pressure sensitive plug gauge. The entire length of the plug gauge is clamped in the hydraulic chuck so that when tightening the clamping screw the clamping pressure of the chuck is optimally applied. The clamping force measuring instrument displays the clamping force as an absolute measurement value on the one hand and as a percentage clamping force in relation to a reference value that can be set individually on the other. This way, SENSO 3000 can be adapted to customer specific application conditions and requirements.

The clamping force measuring instrument is supplied with a plug gauge for the respective clamping diameter as well as a carbide proofing bar for calibration purposes and a CR 2430 type battery – all in a sturdy and handy case.

HSK Drawbar Force Gauge Sensors, Wired
HSK Drawbar Force Gauge Sensors, Wired

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Chuck Force Sensor Extensions and Accessories
Chuck Force Sensor Extensions and Accessories

Accessories for the chuck force include a variety of types of rest pads and extensions to match the gripping jaws on a turning-center/chuck.

HSK Taper Wired Force Measuring Bars
HSK Taper Wired Force Measuring Bars

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Wireless Chuck Force Gauges
Wireless Chuck Force Gauges

The ForceCheck wireless chuck force gauge is designed to quickly and accurately measure holding force and speed on chucks. Verifying chuck holding force allows manufacturers to improve the repeatability of a manufacturing process by checking actual holding force under dynamic (rotating) conditions, as well as perform critical preventative maintenance checks. Contact us for other clamping diameters and extension rings, as well as 4+ jaw chucks.

HSK Drawbar Force Gauge Complete Sets, Wired
HSK Drawbar Force Gauge Complete Sets, Wired

Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.

Page loaded in 0.1886 seconds.