465.F40.000.000
Steep Taper 40 (BT) Dual Contact Runout Arbor
Spindle Taper | Length (L) | Diameter (D) | Part Number | |||||
---|---|---|---|---|---|---|---|---|
Custom Size | Contact us with your requirements | 465.F00.SP | ||||||
Steep Taper (BT) 30 Dual Contact | 235 mm | 32 mm | 465.F30.000.000 | |||||
Steep Taper (BT) 40 Dual Contact | 300 mm | 40 mm | 465.F40.000.000 | |||||
Steep Taper (BT) 50 Dual Contact | 300 mm | 50 mm | 465.F50.000.000 | |||||
Steep Taper (CAT/ANSI) 40 Dual Contact | 300 mm | 40 mm | 465.G40.000.000 | |||||
Steep Taper (CAT/ANSI) 50 Dual Contact | 300 mm | 50 mm | 465.G50.000.000 | |||||
Steep Taper (DIN) 40 Dual Contact | Contact us | Contact us | 465.H40.000.000 | |||||
Steep Taper (DIN) 50 Dual Contact | Contact us | Contact us | 465.H50.000.000 |
Runout Arbor Upright Storage Cases
Our most popular case, the upright storage case protects a runout arbor from dirt and damage. The arbor rests vertically in the case, suspended from the flange. Upright storage of runout arbors is recommended -- the upright case has foam guides that allow horizontal use if preferred. Case is available in tall and short configurations depending on arbor length. Case is made of 9 ply Baltic Birch.
Part Number | ||||||||
---|---|---|---|---|---|---|---|---|
Runout Arbor Upright Storage Case, Tall | 465.002.000.000 | |||||||
Runout Arbor Upright Storage Case, Short | 465.007.000.000 |
Heavy-Duty Runout Arbor Travel Cases
The runout arbor travel case is designed for portability while protecting arbors. The case holds two arbors, with additional space for extra retention knobs, indicator, and a magnetic base. The case is virtually indestructible and waterproof. Can be used with padlocks for added security.
Part Number | ||||||||
---|---|---|---|---|---|---|---|---|
Heavy-Duty Runout Arbor Travel Case | 465.001.000.000 |
Indicators and Bases
TAC Rockford offers a variety of magnetic bases and indicators for use with runout test arbors and other gauges. Available as kits with storage case or individually.
Steep Taper (MAS 403-BT) Gauge Retention Knobs
Use a BT Standard gauge/taper in steep taper spindles.
Taper | Length (B) | Angle (G) | Thread | Type / Adapter Knob | Part Number | |||
---|---|---|---|---|---|---|---|---|
Steep Taper (BT) 40 | 28mm | 30 deg. | M16 | BT Standard | 590.540.730.800-28mm | |||
Steep Taper (BT) 40 | 28mm | 45 deg. | M16 | BT Standard | 590.540.740.800-28mm | |||
Steep Taper (BT) 40 | 28mm | 90 deg. | M16 | BT Standard | 590.540.700.800-28mm | |||
Steep Taper (BT) 50 | 35mm | 30 deg. | M24 | BT Standard | 590.550.730.800-35mm | |||
Steep Taper (BT) 50 | 35mm | 45 deg. | M24 | BT Standard | 590.550.740.800-35mm | |||
Steep Taper (BT) 50 | 35mm | 90 deg. | M24 | BT Standard | 590.550.700.800-35mm | |||
Steep Taper (BT) 30 | 0.75mm | - | - | DIN 30 Gauge >> BT 30 Spindle | - | 590.530.005.000-0.75mm | ||
Steep Taper (BT) 40 | 25.15mm | 30 deg. | M16 | DIN 40 Gauge >> BT 40 Spindle | 590.540.730.800-25.15mm | |||
Steep Taper (BT) 40 | 25.15mm | 45 deg. | M16 | DIN 40 Gauge >> BT 40 Spindle | 590.540.740.800-25.15mm | |||
Steep Taper (BT) 40 | 25.15mm | 90 deg. | M16 | DIN 40 Gauge >> BT 40 Spindle | 590.540.700.800-25.15mm | |||
Steep Taper (BT) 50 | 35.2mm | 30 deg. | M24 | DIN 50 Gauge >> BT 50 Spindle | 590.550.730.800-35.2mm | |||
Steep Taper (BT) 50 | 35.2mm | 45 deg. | M24 | DIN 50 Gauge >> BT 50 Spindle | 590.550.740.800-35.2mm | |||
Steep Taper (BT) 50 | 35.2mm | 90 deg. | M24 | DIN 50 Gauge >> BT 50 Spindle | 590.550.700.800-35.2mm | |||
Steep Taper (BT) 40 | 28mm | 30 deg. | 5/8"-11 | CAT 40 Gauge >> BT 40 Spindle | 590.540.730.900-28mm | |||
Steep Taper (BT) 40 | 28mm | 45 deg. | 5/8"-11 | CAT 40 Gauge >> BT 40 Spindle | 590.540.740.900-28mm | |||
Steep Taper (BT) 40 | 28mm | 90 deg. | 5/8"-11 | CAT 40 Gauge >> BT 40 Spindle | 590.540.700.900-28mm | |||
Steep Taper (BT) 40 | 25.15mm | 30 deg. | 5/8"-11 | CAT 40 Gauge >> BT 40 Spindle | 590.540.730.900-25.15mm | |||
Steep Taper (BT) 40 | 25.15mm | 45 deg. | 5/8"-11 | CAT 40 Gauge >> BT 40 Spindle | 590.540.740.900-25.15mm | |||
Steep Taper (BT) 40 | 25.15mm | 90 deg. | 5/8"-11 | CAT 40 Gauge >> BT 40 Spindle | 590.540.700.900-25.15mm | |||
Steep Taper (BT) 50 | 35mm | 30 deg. | 1"-8 | CAT 50 Gauge >> BT 50 Spindle | 590.550.730.900-35mm | |||
Steep Taper (BT) 50 | 35mm | 45 deg. | 1"-8 | CAT 50 Gauge >> BT 50 Spindle | 590.550.740.900-35mm | |||
Steep Taper (BT) 50 | 35mm | 90 deg. | 1"-8 | CAT 50 Gauge >> BT 50 Spindle | 590.550.700.900-35mm | |||
Steep Taper (BT) 50 | 35.2mm | 30 deg. | 1"-8 | CAT 50 Gauge >> BT 50 Spindle | 590.550.730.900-35.2mm | |||
Steep Taper (BT) 50 | 35.2mm | 45 deg. | 1"-8 | CAT 50 Gauge >> BT 50 Spindle | 590.550.740.900-35.2mm | |||
Steep Taper (BT) 50 | 35.2mm | 90 deg. | 1"-8 | CAT 50 Gauge >> BT 50 Spindle | 590.550.700.900-35.2mm |
Steep Taper (DIN 69871) Gauge Retention Knobs
Use a DIN 69871 Standard gauge/taper in steep taper spindles.
Spindle Taper | Length (B) | Angle (G) | Thread | Type / Adapter Knob | Part Number | |||
---|---|---|---|---|---|---|---|---|
Steep Taper (DIN) 30 | 19 | 15 deg. | M12 | DIN 69871 | 590.530.810.800 | |||
Steep Taper (DIN) 40 | 20 | 15 deg. | M16 | DIN 69871 | 590.540.810.800 | |||
Steep Taper (DIN) 50 | 25 | 15 deg. | M24 | DIN 68871 | 590.550.810.800 | |||
Steep Taper (DIN) 60 | 30 | 15 deg. | M30 | DIN 69871 | 590.560.811.800 | |||
Steep Taper (DIN) 30 | 19 | 15 deg. | 1/2'-13 | CAT 30 Gauge >> DIN 30 Spindle | 590.530.810.900 | |||
Steep Taper (DIN) 40 | 20 | 15 deg. | 5/8"-11 | CAT 40 Gauge >> DIN 40 Spindle | 590.540.810.900 | |||
Steep Taper (DIN) 50 | 25 | 15 deg. | 1"-8 | CAT 50 Gauge >> DIN 50 Spindle | 590.550.810.900 | |||
Steep Taper (DIN) 40 | 23 | 15 deg. | M16 | BT 40 Gauge >> DIN 40 Spindle | 590.540.811.700-23mm |
Steep Taper (CAT/ANSI) Gauge Retention Knobs
Use a CAT/ANSI (ASME) B5.50 Standard "V" taper gauge in steep taper spindles.
Taper | Length (B) | Angle (G) | Thread | Type / Adapter Knob | Part Number | |||
---|---|---|---|---|---|---|---|---|
Steep Taper (CAT/ANSI) 30 | 0.32" | 45 deg. | 1/2"-13 | CAT/ANSI (ASME) B5.50 | 590.530.940.900 | |||
Steep Taper (CAT/ANSI) 40 | 0.44" | 45 deg. | 5/8"-11 | CAT/ANSI (ASME) B5.50 | 590.540.940.900 | |||
Steep Taper (CAT/ANSI) 50 | 0.70" | 45 deg. | 1"-8 | CAT/ANSI (ASME) B5.50 | 590.550.940.900 | |||
Steep Taper (CAT/ANSI) 60 | 1.08" | 45 deg. | 1.25"-7 | CAT/ANSI (ASME) B5.50 | 590.560.941.900 | |||
Steep Taper (CAT/ANSI) 40 | 14.02 | 45 deg. | M16 | BT 40 Gauge >> CAT 40 Spindle | 590.540.940.700-14.02mm | |||
Steep Taper (CAT/ANSI) 30 | 0.32" | 45 deg. | M12 | DIN 30 Gauge >> CAT 30 Spindle | 590.530.940.800 | |||
Steep Taper (CAT/ANSI) 40 | 0.44" | 45 deg. | M16 | DIN 40 Gauge >> CAT 40 Spindle | 590.540.940.800 | |||
Steep Taper (CAT/ANSI) 50 | 0.70" | 45 deg. | M24 | DIN 50 Gauge >> CAT 50 Spindle | 590.550.940.800 | |||
Steep Taper (CAT/ANSI) 60 | 1.08" | 45 deg. | M30 | DIN 60 Gauge >> CAT 60 Spindle | 590.560.941.800 |
For more information regarding this item (Steep Taper 40 (BT) Dual Contact Runout Arbor) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Steep Taper Dual Contact Runout Test Arbors
Compatible with Big-Plus® steep taper spindles.
BT-DC Steep Taper Tool Holder Blanks
40 and 50 steep taper BT Dual Contact blanks are available from TAC Rockford.
PSC / PSK Spindle Runout Test Arbors
Made to the ISO 26623 Standard. Maximum runout error 0.003mm / 3 micron / 0.00012”. A certificate of accuracy is included. Storage are cases not included.
Steep Taper Spindle Runout Test Arbors
<ul> <li>Maximum runout error 0.003mm / 3 micron / 0.00012 inch</li> <li>Cylindricity ≤ 0.002mm / 2 micron / 0.00008 inch</li> <li>Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006).</li> <li>A certificate of accuracy is included. Traceable certificates available; contact us for details.</li> <li>Contact us for other lengths, tapers, and other special requirements.</li> </ul> </p>
HSK Spindle Runout Test Arbors
- Maximum runout error 0.003mm / 3 micron / 0.00012 inch. - Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006). - A certificate of accuracy is included. Traceable certificates available; contact us for details. - Contact us for other lengths, tapers, and other special requirements.
R8 Taper Spindle Runout Test Arbor
Standard R8 spindle runout test arbor with inch retention thread. Runout <=0.003 micron (0.00012 inch)
Steep Taper Standard Ball-End Runout Test Arbors
Ball end spindle runout test arbors are designed checking positioning accuracy of 5-axis machines, but can also be used in place of a standard runout test bars when a shorter length is required or for a touchoff point from the spindle face (ball end is ideal for this purpose).
KM Spindle Runout Test Arbors
- Maximum runout error 0.003mm [0.00012 in.] <br> - Carrying cases are not included. Visit www.tac.us/runoutcases for available case styles (Data Sheet 465.006). <br> - A certificate of accuracy is included. Traceable certificates available; contact us for details. <br> - Contact us for other lengths, tapers, and other special requirements. <br> * ISO 26622 runout arbor tapers are compatible with machines using TS, XMZ (Mazak Integrex), and ATC. Flange may not be suitable for use with automatic tool changers.
Basic Runout Arbor Storage Stands
The basic storage stand is designed for vertical storage of a runout arbor in a protected gauge closet, etc. (the taper is not protected). Stands are available upon request at no charge with runout arbor purchase. Stand is made of solid hardwood.
Steep Taper (DIN) to HSK Adapters
Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.