495.250.12mm

ForceCheck Hydraulic Tool Holder Force Gauges - 12mm Hydraulic Tool Holder Force Sensor

ForceCheck Hydraulic Tool Holder Force Gauges - 12mm Hydraulic Tool Holder Force Sensor

Zoom Enlarge Image

ForceCheck Hydraulic Tool Holder Force Gauges - 12mm Hydraulic Tool Holder Force Sensor

Hydraulic tool holders are an excellent ultra-low option with added benefits such as vibration damping and ease of use. One of the major challenges with hydraulic holders is determining if they are still functioning correctly over time. Failure of the hydaulic holding mechanism is often not apparent until cutter slippage occurs, potentially causing damage to both the holder and a scrapped workpiece. ForceCheck hydraulic tool holder force gauges provide a quick and reliable way to verify a tool holder is still operating correctly. The sensor measures the force at the center of the hydraulic sleeve. Using the gauge is as easy as inserting the sensor in the hydraulic holder. Once the actuation piston compresses the hydraulic fluid in the expansion sleeve, the resulting force is shown on a handheld digital display. The measured force can be compared to a new or known-good hydraulic tool holder.

Full Data Sheet (495.250)

PDF Data Sheet: ForceCheck Hydraulic Tool Holder Force Gauges (495.250)

  Details  Ask a Question  Request a Quote

Part Number
1 inch Hydraulic Tool Holder Force Sensor                 495.250.1"
1-1/4 inch Hydraulic Tool Holder Force Sensor                 495.250.1-1/4"
1/2 inch Hydraulic Tool Holder Force Sensor                 495.250.1/2"
10mm Hydraulic Tool Holder Force Sensor                 495.250.10mm
12mm Hydraulic Tool Holder Force Sensor                495.250.12mm
14mm Hydraulic Tool Holder Force Sensor                 495.250.14mm
16mm Hydraulic Tool Holder Force Sensor                 495.250.16mm
18mm Hydraulic Tool Holder Force Sensor                 495.250.18mm
20mm Hydraulic Tool Holder Force Sensor                 495.250.20mm
25mm Hydraulic Tool Holder Force Sensor                 495.250.25mm
3/4 inch Hydraulic Tool Holder Force Sensor                 495.250.3/4"
3/8 inch Hydraulic Tool Holder Force Sensor                 495.250.3/8"
32mm Hydraulic Tool Holder Force Sensor                 495.250.32mm
5/8 inch Hydraulic Tool Holder Force Sensor                 495.250.5/8"
8mm Hydraulic Tool Holder Force Sensor                 495.250.8mm

ForceCheck Force Gauge Base Set - Wired
ForceCheck Force Gauge Base Set - Wired

Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

Details PDF (461.310)

Part Number
ForceCheck Base Set                 461.310.000.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (ForceCheck Hydraulic Tool Holder Force Gauges - 12mm Hydraulic Tool Holder Force Sensor) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

ForceCheck Workholding Collet Force Gauge
ForceCheck Workholding Collet Force Gauge

ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.

Applications for ForceCheck workholding collet force gauges include:

-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining


A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.

Page loaded in 0.1147 seconds.