451.CG0

Granite Inspection Cylinders

Granite Inspection Cylinder (Click image to enlarge)
Granite Inspection Cylinder Diagram (Click image to enlarge)

Granite Inspection Cylinder

Zoom Enlarge Image

Granite Inspection Cylinder

  Products  Details  Ask a Question  Request a Quote
Cylinder H (mm) D (mm) Perpendicularity (mm) Cylindricity (mm) Part Number
200 x 70   200  70  0.002  0.002        451.CG0.200.070
300 x 80   300  80  0.003  0.003        451.CG0.300.080
400 x 100   400  100  0.004  0.004        451.CG0.400.100
500 x 120   500  120  0.005  0.005        451.CG0.500.120
800 x 160   800  160  0.006  0.006        451.CG0.800.160

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Granite Inspection Cylinders) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Master Granite Setup Squares (90 degrees)
Master Granite Setup Squares (90 degrees)

<b>This product has been replaced by:</b>
<a href="https://tacrockford.com/product/gauges/machine-center-dimensional/granite-squares/">Granite Square Series 451.2G0</a>


Granite block with two diamond-lapped measuring faces. Made in Germany to DIN 875 / 876 standard.

Granite Squares
Granite Squares

Granite Squares 4-Sided
Granite Squares 4-Sided

Tool Holder Taper Inspection Gauge
Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

HSK Tool Holder Taper Inspection Gauge
HSK Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.

HDT Tool Clamping Cylinders
HDT Tool Clamping Cylinders

HDT pressure intensifiers are primarily designed for tool clamping and chucking systems using stationary hydraulic cylinders of the type HLZ for releasing the tool shanks when no hydraulic unit is available for operating them.

Precision Measuring Cylinders
Precision Measuring Cylinders

Hardened special steel. Machined base and jacket surface.

Air/Oil Clamping Cylinders
Air/Oil Clamping Cylinders

OSKL Tool Clamping Cylinders
OSKL Tool Clamping Cylinders

OSKL rotating hydraulic cylinders are primarily designed for actuating SSK gripper, but are also suitable for operating other clamping and chucking systems.

Page loaded in 0.0974 seconds.