963.14777.000.0

BERG HSK Gripper HSH - BERG Gripper HSH 60 for HSK-A 80

Designed to accommodate significantly higher clamping forces than specified in the HSK standard, the BERG Spanntechnik HSH gripper is ideal for applications requiring an extremely rigid tool holder to spindle interface.

Full Data Sheet (291-HSH)

PDF Data Sheet: HSK Gripper HSH (291-HSH)

Details Ask a Question Request a Quote

Product	Gripper
Part Type	HSH
Taper / Standard	HSK-A
Taper Size	80

Item								Part Number
BERG Gripper HSH 48 for HSK-A 63								963.14698.000.2
BERG Gripper HSH 75 for HSK-A 100								963.14776.000.0
BERG Gripper HSH 60 for HSK-A 80								963.14777.000.0
BERG Gripper HSH 38 for HSK-A 50								963.15187.000.0

For more information regarding this item (BERG HSK Gripper HSH - BERG Gripper HSH 60 for HSK-A 80) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

HSK Gripper HSH

Drawbar Clamping Forces

Drawbar forces in this document are sourced from international standards and gripper manufacturers. This information is for reference only: For specifications applicable to a specific machine, the machine builder should be contacted. Depending on the application, it is typical for a machine builder to design a machine for higher or lower forces.

HSK Hydraulic Self-Locking Clamping Systems

The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.

Transfer Rail Couplings

The mechanical self-locking Berg gripper rail coupling GSM is designed for manual coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.

Capto Clamping Systems

BERG Spanntechnik is a leading supplier of Capto grippers and clamping systems.

BERG SSK Gripper Installation Instructions

Spring Stacks

Spring stacks are used in machining spindles for mechanically generating the actuation force for the clamping means.

Stationary Electromechanical Gripper Style Clamping Systems

Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.

HSK Grippers HSS and HSSL

The BERG Spanntechnik HSS gripper has been replaced by the HK and HKR. Replacement grippers are available for existing machines.

HSK Grippers HK and HKR

The BERG Spanntechnik HK and HKR series grippers have significant technical advantages, including integrated force intensification, easy-to-machine spindle contour, and a tribolic coating that does not need lubrication.

The HKR gripper adds the unique capability of holding a tool with low force before the tool is clamped. This means that the spindle can pull away from the tool changer before tool clamping takes places (a key feature when fast tool change time is needed).