461.310

ForceCheck ForceCheck Force Gauge Base Set - Wired

ForceCheck Wired Base Set

Zoom Enlarge Image

ForceCheck Wired Base Set

Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

PDF Data Sheet: ForceCheck ForceCheck Force Gauge Base Set - Wired (461.310)

Part Number
ForceCheck Base Set                 461.310.000.000

HSK Drawbar Force Gauge Sensors, Wired
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details


Steep Taper (BT) Wired ForceCheck Sensors
Steep Taper (BT) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details

ForceCheck Sensor, Wired Part Number
Steep Taper (BT) 30                 461.200.730.000
Steep Taper (BT) 35                 461.200.735.000
Steep Taper (BT) 40                 461.200.740.000
Steep Taper (BT) 50                 461.200.750.000
ForceCheck Base Set                 461.310.000.000

Steep Taper (DIN) Wired ForceCheck Sensors
Steep Taper (DIN) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details


PSK/PSC Wired ForceCheck Sensors
PSK/PSC Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details

ForceCheck Sensor, Wired Part Number
PSK/PSC C3                 461.200.C03.000
PSK/PSC C4                 461.200.C04.000
PSK/PSC C5                 461.200.C05.000
PSK/PSC C6                 461.200.C06.000
PSK/PSC C8                 461.200.C08.000
PSK/PSC C10                 461.200.C10.000
PSK/PSC C8X                 461.200.C8X.000

KM Wired ForceCheck Sensors
KM Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details

ForceCheck Sensor, Wired Part Number
KM 32                 461.200.K32.000
KM 40                 461.200.K40.000
KM 50                 461.200.K50.000
KM 63                 461.200.K63.000
KM 6350                 461.200.K65.000
KM 80                 461.200.K80.000
KM 100                 461.200.K90.000
KM 10080                 461.200.K98.000
KM4X 63                 461.200.K63.04B
KM4X 100                 461.200.K90.04B

Steep Taper (ISO) Wired ForceCheck Sensors
Steep Taper (ISO) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details

ForceCheck Sensor, Wired Part Number
Steep Taper (ISO) 10                 461.200.A10.000
Steep Taper (ISO) 15                 461.200.A15.000
Steep Taper (ISO) 20                 461.200.A20.000
Steep Taper (ISO) 25                 461.200.A25.000

ForceCheck Sensor for Lyndex-Nikken NC5
ForceCheck Sensor for Lyndex-Nikken NC5

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Details

ForceCheck Sensor, Wired Part Number
Lyndex-Nikken NC5-46                 461.200.L46.000
Lyndex-Nikken NC5-53                 461.200.L53.000
Lyndex-Nikken NC5-63                 461.200.L63.000
Lyndex-Nikken NC5-85                 461.200.L85.000
Lyndex-Nikken NC5-100                 461.200.L90.000

Chuck Force Gauges - Wired
Chuck Force Gauges - Wired

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Details

Measuring Diameter Jaws Diameter Force Range (per Jaw) Part Number
D28   2 / 3  28 mm / 1.10 in.  0...15kN / 3,400 lb-F          495.200.028.003
D72   2 / 3  72 mm / 2.83 in.  0...50kN / 11,200 lb-F          495.200.072.003
D125   2 / 3 / 4  125 mm / 4.92 in.  0...65kN / 14,600 lb-F          495.200.125.004
D200   2 / 3 / 4 / 6  200 mm / 7.87 in.  0...100kN / 22,500 lb-F          495.200.200.006
D28 (Low Force)   2 / 3  28 mm / 1.10 in.  Contact us          495.200.028.003.LF
D72 (Low Force)   2 / 3  72 mm / 2.83 in.  Contact us          495.200.072.003.LF
D125 (Low Force)   2 / 3 / 4  125 mm / 4.92 in.  Contact us          495.200.125.004.LF
D200 (Low Force)   2 / 3 / 4 / 6  200 mm / 7.87 in.  Contact us          495.200.200.006.LF

ForceCheck Workholding Collet Force Gauge
ForceCheck Workholding Collet Force Gauge

ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.

Applications for ForceCheck workholding collet force gauges include:

-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining


A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.

Details

Gauge Diameter Insertion Depth Part Number
8mm Collet Force Sensor     8mm  20mm          495.245.08mm
10mm Collet Force Sensor     10mm  20mm          495.245.10mm
12mm Collet Force Sensor     12mm  20mm          495.245.12mm
14mm Collet Force Sensor     14mm  20mm          495.245.14mm
16mm Collet Force Sensor     16mm  25mm          495.245.16mm
18mm Collet Force Sensor     18mm  25mm          495.245.18mm
20mm Collet Force Sensor     20mm  25mm          495.245.20mm
25mm Collet Force Sensor     25mm  30mm          495.245.25mm
30mm Collet Force Sensor     30mm  30mm          495.245.30mm
40mm Collet Force Sensor     40mm  30mm          495.245.40mm
3/8 inch Collet Force Sensor     0.375"  0.80"          495.245.3/8"
1/2 inch Collet Force Sensor     0.500"  0.80"          495.245.1/2"
5/8 inch Collet Force Sensor     0.625"  1.00"          495.245.5/8"
3/4 inch Collet Force Sensor     0.750"  1.25"          495.245.3/4"
1 inch Collet Force Sensor     1.000"  1.25"          495.245.1"
1-1/4 inch Collet Force Sensor     1.250"  1.25"          495.245.1-1/4"
1-1/2 inch Collet Force Sensor     1.500"  1.25"          495.245.1-1/2"
1/2 inch Hex Bar Collet Force Sensor     0.500" Hex Bar  0.80"          495.245.H1/2"
3/4 inch Hex Bar Collet Force Sensor     0.750" Hex Bar  1.25"          495.245.H3/4"
7/8 inch Hex Bar Collet Force Sensor     0.875" Hex Bar  1.25"          495.245.H7/8"
1 inch Hex Bar Collet Force Sensor     1.000" Hex Bar  1.25"          495.245.H1"
Special Configuration     Customized  Customized          495.245.SP

Sets include display readout unit, connecting cable for wired unit, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (ForceCheck ForceCheck Force Gauge Base Set - Wired) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Large Diameter VTL Chuck Force Gauges
Large Diameter VTL Chuck Force Gauges

Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.

HSK Taper Wired Force Measuring Bars
HSK Taper Wired Force Measuring Bars

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

ForceCheck Workholding Collet Force Gauge
ForceCheck Workholding Collet Force Gauge

ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.

Applications for ForceCheck workholding collet force gauges include:

-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining


A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.

HSK Drawbar Force Gauge Sensors, Wired
HSK Drawbar Force Gauge Sensors, Wired

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Chuck Force Gauges - Wired
Chuck Force Gauges - Wired

Designed to quickly check the holding force on a chuck or turning-center. The wired chuck force gauge can be customized for any diameter.

Steep Taper (CAT/ANSI) Wired ForceCheck Sensors
Steep Taper (CAT/ANSI) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Steep Taper (DIN) Wired ForceCheck Sensors
Steep Taper (DIN) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Steep Taper (ISO) Wired ForceCheck Sensors
Steep Taper (ISO) Wired ForceCheck Sensors

Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.

Drawbar Force Base Unit and Accessories
Drawbar Force Base Unit and Accessories

Various accessories, base sets, and custom items for the ForceCheck system.

Page loaded in 0.2974 seconds.