619.550.050.100
HSK-A Tool Holder Blanks - HSK-A 50
Full Data Sheet (619.525)
PDF Data Sheet: HSK-A Tool Holder Blanks (619.525)| Product | Tool Holder |
| Part Type | Blank |
| D (mm) | 50 |
| L (mm) | 100 |
| f1 (mm) | 26 |
| f2 (mm) | 42 |
| d1 (mm) | 50 |
| d9 (mm) | 42 |
| Standard | ISO 12164-1 / DIN 69893 / ASME B5.62 |
| Taper | L (mm) | D (mm) | f1 (mm) | f2 (mm) | d1 (mm) | d9 (mm) | Standard | Part Number |
|---|---|---|---|---|---|---|---|---|
| HSK-A 25...160 | Custom | Contact us with your requirements | 619.500.SP | |||||
| HSK-A 25 | 100 | 25 | 10 | 20 | 25 | 16.4 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.525.025.100 |
| HSK-A 32 | 120 | 40 | 20 | 35 | 32 | 26 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.532.040.120 |
| HSK-A 40 | 100 | 40 | 20 | 35 | 40 | 34 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.540.040.100 |
| HSK-A 50 | 100 | 50 | 26 | 42 | 50 | 42 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.550.050.100 |
| HSK-A 50 | 160 | 63 | 26 | 42 | 50 | 42 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.550.063.160 |
| HSK-A 50 | 200 | 63 | 26 | 42 | 50 | 42 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.550.063.200 |
| HSK-A 63 | 100 | 63 | 42 | 63 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.563.063.100 | ||
| HSK-A/T 63 | 140 | 63 | 26 | 63 | N/A | ISO 12164-3 (ICTM) | 619.563.063.140 | |
| HSK-A 63 | 200 | 63 | 26 | 42 | 63 | 53 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.563.063.200 |
| HSK-A 63 | 160 | 80 | 26 | 42 | 63 | 53 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.563.080.160 |
| HSK-A 63 | 250 | 80 | 26 | 42 | 63 | 53 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.563.080.250 |
| HSK-A 63 | 250 | 100 | 26 | 42 | 63 | 53 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.563.100.250 |
| HSK-A/T 63 | 140 | 108 | 26 | 63 | N/A | ISO 12164-3 (ICTM) | 619.563.108.140 | |
| HSK-A 80 | 160 | 80 | 26 | 42 | 80 | 68 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.580.080.160 |
| HSK-A 80 | 250 | 80 | 26 | 42 | 80 | 68 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.580.080.250 |
| HSK-A 100 | 160 | 100 | 29 | 45 | 100 | 88 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.590.100.160 |
| HSK-A 100 | 250 | 100 | 29 | 45 | 100 | 88 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.590.100.250 |
| HSK-A/T 100 | 160 | 120 | 29 | 100 | N/A | ISO 12164-3 (ICTM) | 619.590.120.160 | |
| HSK-A 125 | 160 | 125 | 29 | 45 | 125 | 111 | ISO 12164-1 / DIN 69893 / ASME B5.62 | 619.592.125.160 |
| HSK-T 63 | 140 | 63 | 63 | 26 | N/A | ISO 12164-3 (ICTM) | 6T9.563.063.140 | |
| HSK-T 63 | 140 | 108 | 63 | 26 | 36 | ISO 12164-3 (ICTM) | 6T9.563.108.140 | |
| HSK-T 100 | 160 | 120 | 100 | 29 | 53 | ISO 12164-3 (ICTM) | 6T9.590.120.160 |
For more information regarding this item (HSK-A Tool Holder Blanks - HSK-A 50) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-T Tool Holder Blanks
HSK-T tool holder blanks made to ICTM standard / ISO 12164-3
HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.
HSK-A 80 to 125 Tool Holder Blanks
<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>
HSK-F Tool Holder Blanks
TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.
HSK-A Tool Holder Blanks
TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.
HSK-C Tool Holder Blanks
- Contact us for other HSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
- DIN333 Form B center on blank end.
HSK-E Tool Holder Blanks
TAC Rockford stocks HSK-E32, HSK-E40, HSK-E50, and HSK-E63 blanks in a variety of diameters and lengths. Other sizes are available
- contact us with your requirements.
PSC/PSK Tool Holder Blanks
- Contact us for other PSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
Submit your feedback