685.AZS-A
HSK Axial-Clamping Manual Grippers for Flange Installation
PDF Data Sheet: HSK Axial-Clamping Manual Grippers for Flange Installation (685.AZS-A)| HSK-A | HSK-B | Key Size | Torque | Force | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C/E 32 | HSK-B/D/F 40 | 4 | 3 Nm | 9 kN | 685.AZS.032.A00 | |||
| HSK-A/C/E 40 | HSK-B/D/F 50 | 4 | 6 Nm | 20 kN | 685.AZS.040.A00 | |||
| HSK-A/C/E 50 | HSK-B/D/F 63 | 5 | 10 Nm | 30 kN | 685.AZS.050.A00 | |||
| HSK-A/C/E 63 | HSK-B/D/F 80 | 6 | 12.5 Nm | 40 kN | 685.AZS.063.A00 | |||
| HSK-A/C/E 80 | HSK-B/D/F 100 | 8 | 18 Nm | 60 kN | 685.AZS.080.A00 | |||
| HSK-A/C/E 100 | HSK-B/D/F 125 | 8 | 25 Nm | 80 kN | 685.AZS.100.A00 |
For more information regarding this item (HSK Axial-Clamping Manual Grippers for Flange Installation) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Axial-Clamping Manual Clamping Grippers
The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa
- the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.
KS Installation Tools
Available for HSK-C 32, 40, 50, 63, 80, 100
HSK-C 4 Point Manual Clamping Sets for Conventional Cooling
- For a coolant pressure up to 80 bar
- Includes installation and operating instructions
HSK Manual Clamping Grippers with Axial Drive
The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.
KS Clamping Cartridges for Minimal Lubrication (MLC)
Available for HSK-C 40, 50, 63, 80, 100
HSK-C PowerClamp Manual Clamping Sets
- For coolant up to 80 bar
- Includes installation and operating instructions
- Includes threaded pin
Tool Holder Flange Grippers
Designed for applications where the tool holder flange v-groove needs to be accessible for pickup with a changer arm or other mechanism.
Mounting Nuts for HSK-A/C Interface Adaption
Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.
Submit your feedback