683.4741.110.063

HSK-A 63 MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change

- New MQL standard - l2 plug-depth at DIN 6535 - For 1-channel systems - Balancing quality G6.3 / 15,000 rpm. - For shank tolerance h6

Full Data Sheet (683.741)

PDF Data Sheet: MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change (683.741)

Details Ask a Question Request a Quote

Product	Tool Holder
Part Type	Heat Shrink
Taper / Standard	HSK-A
Taper Size	63
Ø h6 (d1)	10
Length (l1)	160

Taper (d3)	Length (l1)	Ã˜ h6 (d1)	Part Number
HSK-A 40	80	6	683.4741.006.040
HSK-A 50	80	6	683.4741.006.050
HSK-A 63	80	6	683.4741.006.063
HSK-A 80	85	6	683.4741.006.080
HSK-A 100	85	6	683.4741.006.100
HSK-A 40	80	8	683.4741.008.040
HSK-A 50	80	8	683.4741.008.050
HSK-A 63	80	8	683.4741.008.063
HSK-A 80	85	8	683.4741.008.080
HSK-A 100	85	8	683.4741.008.100
HSK-A 40	80	10	683.4741.010.040
HSK-A 50	85	10	683.4741.010.050
HSK-A 63	85	10	683.4741.010.063
HSK-A 80	90	10	683.4741.010.080
HSK-A 100	90	10	683.4741.010.100
HSK-A 40	90	12	683.4741.012.040
HSK-A 50	90	12	683.4741.012.050
HSK-A 63	90	12	683.4741.012.063
HSK-A 80	95	12	683.4741.012.080
HSK-A 100	95	12	683.4741.012.100
HSK-A 40	90	14	683.4741.014.040
HSK-A 50	90	14	683.4741.014.050
HSK-A 63	90	14	683.4741.014.063
HSK-A 80	95	14	683.4741.014.080
HSK-A 100	95	14	683.4741.014.100
HSK-A 40	90	16	683.4741.016.040
HSK-A 50	95	16	683.4741.016.050
HSK-A 63	95	16	683.4741.016.063
HSK-A 80	100	16	683.4741.016.080
HSK-A 100	100	16	683.4741.016.100
HSK-A 50	95	18	683.4741.018.050
HSK-A 63	95	18	683.4741.018.063
HSK-A 80	100	18	683.4741.018.080
HSK-A 100	100	18	683.4741.018.100
HSK-A 50	100	20	683.4741.020.050
HSK-A 63	100	20	683.4741.020.063
HSK-A 80	105	20	683.4741.020.080
HSK-A 100	105	20	683.4741.020.100
HSK-A 63	115	25	683.4741.025.063
HSK-A 80	115	25	683.4741.025.080
HSK-A 100	115	25	683.4741.025.100
HSK-A 63	120	32	683.4741.032.063
HSK-A 80	120	32	683.4741.032.080
HSK-A 100	120	32	683.4741.032.100
HSK-A 63	160	6	683.4741.106.063
HSK-A 63	160	8	683.4741.108.063
HSK-A 63	160	10	683.4741.110.063
HSK-A 63	160	12	683.4741.112.063
HSK-A 63	160	14	683.4741.114.063
HSK-A 63	160	16	683.4741.116.063
HSK-A 63	160	18	683.4741.118.063
HSK-A 63	160	20	683.4741.120.063
HSK-A 63	160	25	683.4741.125.063
HSK-A 63	160	32	683.4741.132.063
HSK-A 63	120	6	683.4741.206.063
HSK-A 63	120	8	683.4741.208.063
HSK-A 63	120	10	683.4741.210.063
HSK-A 63	120	12	683.4741.212.063

For more information regarding this item (HSK-A 63 MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change

- New MQL standard
- l2 plug-depth at DIN 6535
- For 1-channel systems
- Balancing quality G6.3 / 15,000 rpm.
- For shank tolerance h6

MQL HSK-A Heat Shrink Fit Chucks for Manual Tool Change

- New MQL standard, l2 is plug-in depth at DIN 6535
- For 1-channel systems
- Balancing quality: G 6.3 / 15,000 rpm
- For shank tolerance h6

HSK-A Heat Shrink Fit Chucks

- Balancing quality G6.3 at 15,000 rpm
- MQL suitable
- For tool shank tolerance h6
- To DIN 69882-8

MQL HSK-A Hydraulic Chucks for Automatic Tool Change

Available for HSK-A 50, 63, 100

Power Clamp Preset Network Heat Shrink Systems

The Power Clamp Preset Network is based on the time-tested Power Clamp Preset. It is equipped with a PC that acts as the interface to your tool management and controls the shrink fit operation as well.