410.240.163.000
HSK-A/C 63 Tool Holder Drive Key Tool Taper Gauges
Measures the size and radius of HSK tool holder drive keys
Full Data Sheet (410.240)
PDF Data Sheet: Tool Holder Drive Key Tool Taper Gauges (410.240)| Product | Gauge |
| Part Type | Tool Holder Taper |
| Taper / Standard | HSK-A/C |
| Taper Size | 63 |
| Taper | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/C 32 | 410.240.132.000 | |||||||
| HSK-A/C 40 | 410.240.140.000 | |||||||
| HSK-A/C 50 | 410.240.150.000 | |||||||
| HSK-A/C 63 | 410.240.163.000 | |||||||
| HSK-A/C 80 | 410.240.180.000 | |||||||
| HSK-A/C 100 | 410.240.190.000 | |||||||
| HSK-A/C 125 | 410.240.192.000 | |||||||
| HSK-A/C 160 | 410.240.196.000 |
HSK Tool Holder Drive Key Gauge Manual
Measuring gauge for HSK tool holder taper drive key slots according to ISO 12164-1 (comparison measurement).
Download or print PDF data sheet for complete instructions.
For more information regarding this item (HSK-A/C 63 Tool Holder Drive Key Tool Taper Gauges) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
HSK Tool Holder Drive Key Gauge Manual
Measuring gauge for HSK tool holder taper drive key slots according to ISO 12164-1 (comparison measurement).
Download or print PDF data sheet for complete instructions.
HSK-T Tool Holder Blanks
HSK-T tool holder blanks made to ICTM standard / ISO 12164-3
HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.
Drive Key Spindle Gauges
When inserted in the spindle, the "go" gauge should be in contact with the plane face. The "no go" gauge should not contact the face. Two measuring gauges in storage case: "go" and "no go" plug gauges.
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Morse Tool Holder Taper Sleeve Gauges
TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.
Pneumatic HSK Tool Holder Taper Gauge Kits
Gauging kit for HSK tool holder taper with pneumatic measuring column. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.
Series 968 HSK Tool Holder Taper Gauges
Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)
The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.
The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
Tool Holder Taper Check Gauges
<b>This product has been replaced by gauge 430.124.</b> <a href="http://tacrockford.com/product/gauges/tool-holder-taper/steep-taper/tool-holder-taper-inspection-gauges/">Click here to link to this product.</a>
<b>Features</b>
-Maximize tool life and spindle life
-Ensure tool holder performance
-Tool holder can be tested with components assembled, and works with retention knob installed
-Includes (A) and (B) indicators with 0.0001" resolution
-Carbide locating pins for long life
-Made with hardened tool steel body
-Comes with master shank (C)
Submit your feedback