410.211.132.000 HSK-A/C/E 32 Series 968 HSK Tool Holder Taper Gauges

HSK Tool Holder Taper Gauge

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

PDF Data Sheet: Series 968 HSK Tool Holder Taper Gauges (410.211)

Product	Gauge
Part Type	Tool Holder Taper
Taper / Standard	HSK-A/C/E
Taper Size	32
Diameter	24

Taper	Diameter	Part Number
HSK-A/C/E 25	19	410.211.125.000
HSK-A/C/E 32	24	410.211.132.000
HSK-A/C/E 40	30	410.211.140.000
HSK-A/C/E 50	38	410.211.150.000
HSK-A/C/E 63	48	410.211.163.000
HSK-A/C/E 80	60	410.211.180.000
HSK-A/C/E 100	75	410.211.190.000

For more information regarding this item (HSK-A/C/E 32 Series 968 HSK Tool Holder Taper Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Series 968 HSK Tool Holder Taper Gauges

Series 968 gauges offer comprehensive dimensional verification of HSK tool holders.

Series 410 Dial Indicator Tool Taper Gauges

Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.

Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

Lathe Spindle Face Ring

Series 492.026 ring gauges are for lathe spindle face.

Morse Tool Holder Taper Sleeve Gauges

TAC Rockford Morse tool holder taper gauges are for inspection of Morse tool holder tapers. Gauges made from a hardened gauge steel, and include a certificate. Manufactured per DIN 229.

HSK Certified Master Taper Gauge

These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.

HSK Tool Holder Taper 30 Degree Clamping Angle Gauges

Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.