685.AXS.080.B00

HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper

HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper

Zoom Enlarge Image

HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper

The Axialspanner comes for clamping disc-shaped tools (grinding wheels, saw blades) on HSK-flanges used. With low tension moments high clamping forces are generated, which are more than 50% above the recommended for HSK shanks values. Depending on the application of the AXS is centrally operated from the front through a tool flange or from the rear through the spindle.

HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper (Click image to enlarge)
HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper (Click image to enlarge)
HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper (Click image to enlarge)

Full Data Sheet (685.AXS)

PDF Data Sheet: HSK Manual Clamping Grippers with Axial Drive (685.AXS)

HSK-A HSK-B Key Size Torque Force Part Number
HSK-A/C/E 32     HSK-B/D/F 40    3    6 Nm  12 kN  685.AXS.032.B00
HSK-A/C/E 40     HSK-B/D/F 50    4    11 Nm  16 kN  685.AXS.040.B00
HSK-A/C/E 50     HSK-B/D/F 63    5    18 Nm  24 kN  685.AXS.050.B00
HSK-A/C/E 63     HSK-B/D/F 80    6    24 Nm  30 kN  685.AXS.063.B00
HSK-A/C/E 80    HSK-B/D/F 100    -    -  -  685.AXS.080.B00
HSK-A/C/E 100     HSK-B/D/F 125    -    -  -  685.AXS.100.B00

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK-A/C/E80+B/D/F100 Axial-Clamp Manual Gripper) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Transfer Rail Couplings
Transfer Rail Couplings

The mechanical self-locking Berg gripper rail coupling GSM is designed for manual coupling of gripper rails on transfer presses. A vertical lift-out stroke is required for changing the tool.

Steep Taper Tool Changer Alignment Gauge Instruction Manual
Steep Taper Tool Changer Alignment Gauge Instruction Manual

The tool changer alignment gauge is designed to verify correct alignment of the machine spindle to the tool changer. See PDF for full instruction manual.

Axial Collet Clamping Grippers for HSK 100 Grinding Wheels
Axial Collet Clamping Grippers for HSK 100 Grinding Wheels

The AZS gripper is specially designed to manually mount heavy grinding wheels to a standard HSK 100 tool interface. The grinding wheel is mounted onto a HSK-style tool holder and is held to the spindle extremely accurately. The gripper allows very high clamping forces in a compact design. For example, the clamping force is 55 kN with a clamping torque of only 30 Nm for HSK 100. If needed, this AXS-100 gripper could be adapted for any HSK standard.

Hollow Taper Shank Type C
Hollow Taper Shank Type C

Preferably for use with spindles in transfer lines and special-purpose machines without automatic tool changing, stub spindles, extensions or reducers. Hollow Taper Shanks for Manual Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 without Gripper Groove.

Manually Operated Swing-out Style Transfer Rail Couplings
Manually Operated Swing-out Style Transfer Rail Couplings

The mechanical self-locking swing-out style gripper rail coupling is designed for manual coupling of gripper rails on transfer presses. A short lift-out stroke is required for changing the tool. An axial stroke is required in the event of additional centering with pins. The coupling consists of a hard anodized aluminum housing, a swiveling tensioning rod and a self-locking eccentric cam gearing. This configuration allows high clamping forces and features a high dynamic rigidity with minimum mass.

Stationary Electromechanical Gripper Style Clamping Systems
Stationary Electromechanical Gripper Style Clamping Systems

Electromechanical gripper style clamp for die clamping on sides. When unclamping the collet opens in order to disengage the draw bolt of the die.

Hollow Taper Shank Type D
Hollow Taper Shank Type D

For use in all areas which require even better support with manual tool changing via a large contact face. Hollow Taper Shanks for Manual Tool Changing acc. to ISO 12164/DIN 69 893 Part 1 and 2 without Gripper Groove.

HSK Axial-Clamping Manual Clamping Grippers
HSK Axial-Clamping Manual Clamping Grippers

The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa
- the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.

Page loaded in 0.1699 seconds.