410.148.1

HSK Certified Master Taper Gauge

HSK 63 Tool Holder Inspection Gauge Master (Click image to enlarge)
HSK Tool Holder Inspection Gauge Master (Click image to enlarge)

HSK 63 Tool Holder Inspection Gauge Master

Zoom Enlarge Image

HSK 63 Tool Holder Inspection Gauge Master

These taper master gauges can be used for zeroing the dial indicators on our HSK Tool Holder Inspection Gauges.

HSK Taper Part Number
HSK-A/C/E 25 + HSK-B/D/F 32                 410.148.125.000
HSK-A/C/E 32 + HSK-B/D/F 40                 410.148.132.000
HSK-A/C/E 40 + HSK-B/D/F 50                 410.148.140.000
HSK-A/C/E 50                 410.148.150.000
HSK-A/C/E 63                 410.148.163.000
HSK-B/D/F 63                 410.148.663.000
HSK-A/C 80                 410.148.180.000
HSK-B/D/F 80                 410.148.680.000
HSK-A/C 100                 410.148.190.000

HSK Tool Holder Taper Inspection Gauge
HSK Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.

Details

HSK Taper HSK-B/D/F Part Number
HSK-A/C/E 25 + HSK-B/D/F 32                 410.124.125.000
HSK-A/C/E 32 + HSK-B/D/F 40                 410.124.132.000
HSK-A/C/E 40 + HSK-B/D/F 50                 410.124.140.000
HSK-A/C/E 50                 410.124.150.000
HSK-A/C/E 63                 410.124.163.000
HSK-B/D/F 63                 410.124.663.000
HSK-A/C/E 80 + HSK-B/D/F 100                 410.124.180.000
HSK-B/D/F 80                 410.124.680.000
HSK-A/C 100 + HSK-B/D/F 125                 410.124.190.000
HSK-A 125 + HSK-B/D/F 160                 410.124.192.000
HSK-A 160                 410.124.196.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK Certified Master Taper Gauge) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK Tool Holder Taper Inspection Gauge
HSK Tool Holder Taper Inspection Gauge

Designed to detect tool holder taper wear in seconds.

The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.

Tool Holder Taper Inspection Gauge
Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

HSK Drawbar Stroke Gauge Sets
HSK Drawbar Stroke Gauge Sets

The dimension L5 per DIN69893 and ISO12164 defines the position of the clamping shoulder, toleranced to JS10. Our set of clamping shoulder gauge masters allows the position of automatic clamping systems with position sensors to be verified.

Set includes certified "zero" master, and two out-of-tolerance tapers (plus and minus). Out-of-tolerance tapers are approx. 3x the allowable limit.

High Precision HSK Gauge Masters
High Precision HSK Gauge Masters

To check the extremely small tolerances required by the DIN and ISO
standards for HSK tool holders.

HSK Dial Indicator Spindle Taper Gauge Manual
HSK Dial Indicator Spindle Taper Gauge Manual

Instruction manual for the dial indicator spindle taper gauge (410.310)

Page loaded in 0.1452 seconds.