683.329

Guhring HSK-A Side Lock Holders (Weldon Side)

Guhring HSK-A Side Lock Holders (Weldon Side) (Click image to enlarge)
Guhring HSK-A Side Lock Holders (Weldon Side) (Click image to enlarge)

Available for 32, 40, 50, 63, 80, 100

PDF Data Sheet: Guhring HSK-A Side Lock Holders (Weldon Side) (683.329)

  Products  Details  Ask a Question  Request a Quote
Taper (d3) Length (l1) Ø (d1) Part Number
HSK-A 32   60  6            683.4329.006.032
HSK-A 40   60  6            683.4329.006.040
HSK-A 50   65  6            683.4329.006.050
HSK-A 63   65  6            683.4329.006.063
HSK-A 80   80  6            683.4329.006.080
HSK-A 100   80  6            683.4329.006.100
HSK-A 32   60  8            683.4329.008.032
HSK-A 40   60  8            683.4329.008.040
HSK-A 50   65  8            683.4329.008.050
HSK-A 63   65  8            683.4329.008.063
HSK-A 80   80  8            683.4329.008.080
HSK-A 100   80  8            683.4329.008.100
HSK-A 32   65  10            683.4329.010.032
HSK-A 40   60  10            683.4329.010.040
HSK-A 50   65  10            683.4329.010.050
HSK-A 63   65  10            683.4329.010.063
HSK-A 80   80  10            683.4329.010.080
HSK-A 100   80  10            683.4329.010.100
HSK-A 32   65  12            683.4329.012.032
HSK-A 40   70  12            683.4329.012.040
HSK-A 50   80  12            683.4329.012.050
HSK-A 63   80  12            683.4329.012.063
HSK-A 80   80  12            683.4329.012.080
HSK-A 100   80  12            683.4329.012.100
HSK-A 40   75  14            683.4329.014.040
HSK-A 50   80  14            683.4329.014.050
HSK-A 63   80  14            683.4329.014.063
HSK-A 80   80  14            683.4329.014.080
HSK-A 100   80  14            683.4329.014.100
HSK-A 40   75  16            683.4329.016.040
HSK-A 50   80  16            683.4329.016.050
HSK-A 63   80  16            683.4329.016.063
HSK-A 80   100  16            683.4329.016.080
HSK-A 100   100  16            683.4329.016.100
HSK-A 50   80  18            683.4329.018.050
HSK-A 63   80  18            683.4329.018.063
HSK-A 80   100  18            683.4329.018.080
HSK-A 100   10  18            683.4329.018.100
HSK-A 50   80  20            683.4329.020.050
HSK-A 63   80  20            683.4329.020.063
HSK-A 80   100  20            683.4329.020.080
HSK-A 100   100  20            683.4329.020.100
HSK-A 63   110  25            683.4329.025.063
HSK-A 80   100  25            683.4329.025.080
HSK-A 100   100  25            683.4329.025.100
HSK-A 63   110  32            683.4329.032.063
HSK-A 80   110  32            683.4329.032.080
HSK-A 100   100  32            683.4329.032.100
HSK-A 80   120  40            683.4329.040.080
HSK-A 100   110  40            683.4329.040.100

Product Information
• Balancing quality: G6.3 / 15,000 rpm.
• With bore to DIN 1835-2 form B "Weldon".
• From bore d1 = 25 with two clamping screws.

Scope of Delivery
• Includes clamping screw.
• Order coolant delivery set separately.
• Angle a:
25 degrees at diameter 6-20
45 degrees at diameter 25-40


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Guhring HSK-A Side Lock Holders (Weldon Side)) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

HSK-C Side Lock Holders
HSK-C Side Lock Holders

Available for 32, 40, 50, 63

HSK-A Side Lock Holders (Whistle Notch)
HSK-A Side Lock Holders (Whistle Notch)

Available for HSK-A 32, 40, 50, 63, 80, 100

Heat Exchangers
Heat Exchangers

These cooling systems facilitate the cooling of oils and other media (with BKW equipment even contaminated media). Water is supplied at the front inlet side from the internal side of the tubes while the medium to be cooled flows in from the jacket.

Rear-Clamp Manual Clamping Cartridges
Rear-Clamp Manual Clamping Cartridges

355.621 series manual clamping cartridges are suitable for HSK-E and HSK-F holders that do not have drive key slots or an access hole on the side of the taper. In addition, the center bolt is compatible with standard HSK coolant tubes.

Steep Taper (CAT/ANSI) to HSK Adapters
Steep Taper (CAT/ANSI) to HSK Adapters

Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).

Steep Taper (DIN) to HSK Adapters
Steep Taper (DIN) to HSK Adapters

Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.

HDT Tool Clamping Cylinders
HDT Tool Clamping Cylinders

HDT pressure intensifiers are primarily designed for tool clamping and chucking systems using stationary hydraulic cylinders of the type HLZ for releasing the tool shanks when no hydraulic unit is available for operating them.

Engine and Machinery Mounts
Engine and Machinery Mounts

Steel-spring combination for high efficient shock and vibration absorption in order to avoid creep from elastomer springs and readjustment of machines respectively. We provide custom-designed mounts for all kinds of machines and engines (fixation on the side, straight fixation, universal fixation, fixation of the edge).

HSK-C Collet Holders
HSK-C Collet Holders

Available for HSK-C 25, 32, 40, 50, 63

Page loaded in 0.1308 seconds.