451.CG0.500.120
Granite Inspection Cylinders - 500 x 120
| Cylinder | H (mm) | D (mm) | Perpendicularity (mm) | Cylindricity (mm) | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| 200 x 70 | 200 | 70 | 0.002 | 0.002 | 451.CG0.200.070 | |||
| 300 x 80 | 300 | 80 | 0.003 | 0.003 | 451.CG0.300.080 | |||
| 400 x 100 | 400 | 100 | 0.004 | 0.004 | 451.CG0.400.100 | |||
| 500 x 120 | 500 | 120 | 0.005 | 0.005 | 451.CG0.500.120 | |||
| 800 x 160 | 800 | 160 | 0.006 | 0.006 | 451.CG0.800.160 |
For more information regarding this item (Granite Inspection Cylinders - 500 x 120) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Master Granite Setup Squares (90 degrees)
<b>This product has been replaced by:</b>
<a href="https://tacrockford.com/product/gauges/machine-center-dimensional/granite-squares/">Granite Square Series 451.2G0</a>
Granite block with two diamond-lapped measuring faces. Made in Germany to DIN 875 / 876 standard.
Tool Holder Taper Inspection Gauge
Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)
The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.
Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.
The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.
HSK Tool Holder Taper Inspection Gauge
Designed to detect tool holder taper wear in seconds.
The tool holder taper inspection gauge includes two Fixture Bases, two 0.001mm Indicators, and a carrying case. An optional 410.148 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a known good tool holder can be used in place of the master. Click the Details Tab for more information.
Leaf Springs
We use the following materials in any variant in manufacturing for our clients:
1.4310, 1.4301, CK 75 G, CK 75 H, CK 85, CK 101, CuSn6, CuZn37, CuBe2
Plus any other special material you may supply. We offer the following range of dimensions: strip thickness values of 0.1 to 3.0 mm, strip widths of 2.0 to 120 mm.
Spring Band Steel
We supply spring band steel either as pre-cut blanks or in coils with thickness values of 0.1 to 3.0 mm and widths of 2.0
- 120 mm. Available materials:
1.4310, 1.4301, C 75 S, C 100 S, CuSn6, CuZn37 as well as CuBe2
HDT Tool Clamping Cylinders
HDT pressure intensifiers are primarily designed for tool clamping and chucking systems using stationary hydraulic cylinders of the type HLZ for releasing the tool shanks when no hydraulic unit is available for operating them.
Precision Measuring Cylinders
Hardened special steel. Machined base and jacket surface.
Submit your feedback