461.200.125.000
ForceCheck Drawbar Force Gauge HSK-A/C/E 25
Full Data Sheet (461.200.1)
PDF Data Sheet: HSK Drawbar Force Gauge Sensors, Wired (461.200.1)
ForceCheck Force Gauge Base Set - Wired
Sets include display, connecting cable, and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| ForceCheck Base Set | 461.310.000.000 |
For more information regarding this item (ForceCheck Drawbar Force Gauge HSK-A/C/E 25) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Taper ForceCheck Wireless Drawbar Force Sensors
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check. In addition, the unit offers the optional capability of data logging on a USB stick.
Wireless Drawbar Force Gauges
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check.
Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.
Workholding Collet Drawbar Force Gauge
ForceCheck collet force gauges measure the drawbar pullback force of a 5C, 16C, or 20C collet workholding system. Measurement of collet drawbar force provides an easy way to ensure correct force from machine to machine, or between setups for different parts.
HSK Drawbar Force Gauge Sensors, Wired
Wired Forcecheck sensors also require a wired display unit and connecting cable to fully function.
ForceCheck Drawbar Force Gauge Base Set, Wireless
Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.
HSK Drawbar Force Gauge Complete Sets, Wired
Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.
Drawbar Clamping Force Gauges, Wired
Tool clamping force is often never measured after a machine is put into service. Regular verification allows problems to be detected early so maintenance and repairs can be scheduled. As a result, emergencies and unexpected downtime can be avoided. When troubleshooting, drawbar performance can quickly be verified.
Collet Force Gauges
<b>The original ForceCheck collet force gauge has been replaced by application-specific versions. </b>
<b>For hydraulic tool holders and milling chucks:</b>
<a href="https://tacrockford.com/product/gauges/tool-holder-taper/hydraulic-tool-holder-force-gauges/">Series 495.250 ForceCheck Hydraulic Tool Holder Force Gauges</a>
<b>For workholding collets:</b>
<a href="https://tacrockford.com/product/gauges/workholding/forcecheck-worholding-collet-force-gauge/">Series 495.245 ForceCheck Workholding Collet Force Gauge</a>
With the ForceCheck collet force gauge, the clamping forces on collets and hydraulic tool holders can be measured to obtain accurate machining specifications while fulfilling ISO standard requirements.
Available in complete sets for 1/4, 1/2, 3/4, 1, 10 mm, 16 mm, 20 mm, 25 mm and other diameters.
The ForceCheck collet force gauge allows tool holder and workholding collet holding force to be quickly and easily measured.
Because it is problematic to measure, this critical holding force is typically not checked, even though it plays an important role in manufacturing repeatability.
TAC Rockford, makers of the ForceCheck drawbar clamping measurement system, offers a simple, efficient, and consistently accurate collet force measurement unit.
With this system you can accurately and consistently measure the clamping forces on collets and hydraulic tool holders to obtain accurate machining specifications while fulfilling your company's or customer's ISO standard requirements.
Complete sets include a durable display with standard 9 volt battery, connecting cable, carrying case, and measuring bar.
Individual measuring bars for any size diameter are available.
ForceCheck Workholding Collet Force Gauge
ForceCheck collet force gauges provide a quick and easy way to check force on collet workholding systems.
Applications for ForceCheck workholding collet force gauges include:
-Comparison of holding force between machines, allowing for consistent and repeatable production results regardless of mechanism (manual, hydraulic, or pneumatic)
-Periodic verification to assess if preventive maintenance is needed
-Establish correct holding force for running a particular part or job
-Determine optimal holding force for thin-wall, rings, and other parts sensitive to damage or distortion when machining
A sensor is needed for each diameter to be measured. A ForceCheck base set with display is needed to display results (order separately).
Sensors are also available in low-force versions. Contact us for further information.
Submit your feedback