100.148
ISO and DIN HSK Standard Comparison
PDF Data Sheet: ISO and DIN HSK Standard Comparison (100.148)
For more information regarding this item (ISO and DIN HSK Standard Comparison) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Tool Holder Drive Key Gauge Manual
Measuring gauge for HSK tool holder taper drive key slots according to ISO 12164-1 (comparison measurement).
Download or print PDF data sheet for complete instructions.
Tool Holder Taper Sleeve Gauges
Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65
HSK-A Hydraulic Expansion Chucks
Available for HSK-A 50, 63, 80, 100
HSK-A Collet Chucks for ER/ESX ER-11/16 Collets without Internal Thread
Available for HSK-A 40, 50, 63, 100
HSK-A Reduction Sleeves for Straight Shanks Slim Version
Available for HSK-A 63
HSK-E Collet Chucks ER Type (DIN 6499)
For tools with cylindrical shank DIN 1835-A. Balanced according to ISO 1940-1 up to 10,000 rpm. Available for HSK-E 25, 32, 40, 50, 63.
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
HSK-A Reduction Sleeves for Straight Shanks with Lateral Driving Surface (Weldon)
Available for HSK-A 40, 50, 63, 80, 100
Submit your feedback