689.500 Steep Taper (DIN69871) Tool Holder Blanks

Steep Taper (DIN69871) Tool Holder Blanks (Click image to enlarge)

Steep Taper 40 (DIN) Tool Holder Blank

PDF Data Sheet: Steep Taper (DIN69871) Tool Holder Blanks (689.500)

Products Details Ask a Question Request a Quote

Taper	L (mm)	D (mm)	d8 (mm)	f2 (mm)	Standard	Part Number
Steep Taper SK30 (DIN)	100	45	45	35	DIN 69871 / ISO 7388-1	689.530.045.100
Steep Taper SK40 (DIN)	160	63	50	35	DIN 69871 / ISO 7388-1	689.540.063.160
Steep Taper SK40 (DIN)	250	63	50	35	DIN 69871 / ISO 7388-1	689.540.063.250
Steep Taper SK45 (DIN)	160	80	63	35	DIN 69871 / ISO 7388-1	689.545.080.160
Steep Taper SK50 (DIN)	160	90	80	35	DIN 69871 / ISO 7388-1	689.550.090.160
Steep Taper SK50 (DIN)	250	90	80	35	DIN 69871 / ISO 7388-1	689.550.090.250
Steep Taper SK30/40/45/50/60 (DIN) Custom Size					Contact us with your requirements	689.500.SP

Steep Taper (DIN 69871) 30, 40, 45, and 50 blanks are available from TAC Rockford.

For more information regarding this item (Steep Taper (DIN69871) Tool Holder Blanks) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment		Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:

Questions or comments:

How did you hear about us?
Other:

Your preferred method of contact

Steep Taper (MAS 403 BT) Tool Holder Blanks

30, 40, and 50 steep taper MAS 403 BT blanks are available from TAC Rockford.

BT-DC Steep Taper Tool Holder Blanks

40 and 50 steep taper BT Dual Contact blanks are available from TAC Rockford.

Steep Taper (CAT/ANSI) Tool Holder Blanks

HSK-A 80 to 125 Tool Holder Blanks

<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>

HSK-T Tool Holder Blanks

HSK-T tool holder blanks made to ICTM standard / ISO 12164-3

HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.

KM Tool Holder Blanks

Weinig Tool Holder Blanks

PSC/PSK Tool Holder Blanks

- Contact us for other PSK sizes, diameters, lengths, and other special requirements.

- Taper on standard blanks is finish hardened; blank portion not hardened.

HSK-F Tool Holder Blanks

TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.

689.500

Steep Taper (DIN69871) Tool Holder Blanks

Related