470.315

HSK Drawbar Stroke Gauge Sets

The dimension L5 per DIN69893 and ISO12164 defines the position of the clamping shoulder, toleranced to JS10. Our set of clamping shoulder gauge masters allows the position of automatic clamping systems with position sensors to be verified. Set includes certified "zero" master, and two out-of-tolerance tapers (plus and minus). Out-of-tolerance tapers are approx. 3x the allowable limit.

PDF Data Sheet: HSK Drawbar Stroke Gauge Sets (470.315)

Taper Part Number
HSK-A/E25                 470.315.125.000
HSK-A/C/E/T32 and HSK-F40                 470.315.132.000
HSK-A/C/E/T40 and HSK-F50                 470.315.140.000
HSK-A/C/E/T50 and HSK-F63                 470.315.150.000
HSK-A/C/E/T63 and HSK-F80                 470.315.163.000
HSK-A/C/E/T80                 470.315.180.000
HSK-A/C/T100                 470.315.190.000
HSK-A/C/T125                 470.315.192.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK Drawbar Stroke Gauge Sets) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Drawbar Stroke Verification Gauges
Drawbar Stroke Verification Gauges

Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.

HSK Drawbar Force Gauge Complete Sets, Wired
HSK Drawbar Force Gauge Complete Sets, Wired

Wired complete sets include corresponding drawbar force gauge, display readout unit, connecting cable for wired unit, special carrying case, and certificate.

HSK Drawbar Sensor Position Gauges
HSK Drawbar Sensor Position Gauges

Drawbar position gauges are used to adjust and set drawbar stroke position on HSK machine tool spindles. The gauges allow the clamping angle to be adjusted to the high and low limits, allowing the stroke position to be set.

HSK Taper Drawbar Force Gauges
HSK Taper Drawbar Force Gauges

Measuring bars, complete sets, and base sets for all HSK type spindles. Contact us for other wireless and carrying case options.

ForceCheck Drawbar Force Gauge Base Set, Wireless
ForceCheck Drawbar Force Gauge Base Set, Wireless

Sets include wireless display and carrying case. Measuring bars, adapters, and other accessories are ordered separately.

HSK Hydraulic Self-Locking Clamping Systems
HSK Hydraulic Self-Locking Clamping Systems

The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.

Steep Taper (MAS 403 BT) Drawbar Force Gauges
Steep Taper (MAS 403 BT) Drawbar Force Gauges

Measuring bars, complete sets, and base sets for Steep Taper (MAS 403-BT) JIS standard.

Capto Hydraulic Self-Locking Clamping Systems
Capto Hydraulic Self-Locking Clamping Systems

The self-limiting clamping system for Coromant Capto tools developed by BERG Spanntechnik is used in conjunction with Coromant Capto clamping sets. In this solution the wedge drive is rigidly connected to the clamping set via a drawbar.

Kennametal (KM Taper) Drawbar Force Gauges
Kennametal (KM Taper) Drawbar Force Gauges

Measuring bars, complete sets, and base units for measuring drawbar force on a Kennametal KM spindle.

Page loaded in 0.1122 seconds.