470.315.163.000
Drawbar Sensor Position Gauge Set for HSK-A/C/E/T63 and HSK-F80
Full Data Sheet (470.315)
PDF Data Sheet: HSK Drawbar Stroke Gauge Sets (470.315)| Product | Gauge |
| Part Type | Drawbar Sensor Position |
| Taper | Part Number | |||||||
|---|---|---|---|---|---|---|---|---|
| HSK-A/E25 | 470.315.125.000 | |||||||
| HSK-A/C/E/T32 and HSK-F40 | 470.315.132.000 | |||||||
| HSK-A/C/E/T40 and HSK-F50 | 470.315.140.000 | |||||||
| HSK-A/C/E/T50 and HSK-F63 | 470.315.150.000 | |||||||
| HSK-A/C/E/T63 and HSK-F80 | 470.315.163.000 | |||||||
| HSK-A/C/E/T80 | 470.315.180.000 | |||||||
| HSK-A/C/T100 | 470.315.190.000 | |||||||
| HSK-A/C/T125 | 470.315.192.000 |
For more information regarding this item (Drawbar Sensor Position Gauge Set for HSK-A/C/E/T63 and HSK-F80) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Drawbar Sensor Position Gauges
Drawbar position gauges are used to adjust and set drawbar stroke position on HSK machine tool spindles. The gauges allow the clamping angle to be adjusted to the high and low limits, allowing the stroke position to be set.
HSK Drawbar Stroke Gauge Sets
The dimension L5 per DIN69893 and ISO12164 defines the position of the clamping shoulder, toleranced to JS10. Our set of clamping shoulder gauge masters allows the position of automatic clamping systems with position sensors to be verified.
Set includes certified "zero" master, and two out-of-tolerance tapers (plus and minus). Out-of-tolerance tapers are approx. 3x the allowable limit.
Machine-Integrated Drawbar Force Gauges
The machine-integrated drawbar force gauge automates drawbar force measurement. With a wireless force sensor stored in the tool changer, a machine can periodically automatically check the drawbar without stopping production. Drawbar force is returned to the machine control via a wireless receiver, automatically alerting the operator if insufficient force is detected.
3D New Generation Setup Indicator
The 3D-Sensor NG is a further development of our worldwide accepted and proven Universal 3D-Sensor. Its distinguishing features are improved mechanics and a new and compact design.
Drawbar Stroke Verification Gauges
Prevents gripper failures, spindle and tool holder taper damage, and "stuck" tool holders.
HSK Taper Wireless Force Measuring Bars
Wireless measuring adapters have the option of coming with or without the tool change groove. Wireless adapters can be retrofitted for quick inspection or designed for integrated use; ask us more for details.
Large Diameter VTL Chuck Force Gauges
Measure clamping force on 12+ inch diameter chucks. Available as wired or wireless sensor unit. Base set is separate which includes wired or wireless read-out display, custom case, and accessories for the sensor.
HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
HSK Taper ForceCheck Wireless Drawbar Force Sensors
The ForceCheck wireless drawbar force gauge is based on the same technology as the industry-leading ForceCheck gauge. With the added convenience of wireless operation, larger machines and hard-to-reach spindles are easier to check. In addition, the unit offers the optional capability of data logging on a USB stick.
Submit your feedback