430.124.930.000

Steep Taper 30 Tool Holder Taper Inspection Gauge

Steep Taper Tool Holder Inspection Gauges

Zoom Enlarge Image

Steep Taper Tool Holder Inspection Gauges

Detect tool holder taper wear in seconds

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60) The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish. Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose. The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

Steep Taper Tool Holder Inspection Gauges (Click image to enlarge)
Steep Taper Tool Holder Inspection Gauges w/ plug (Click image to enlarge)
Steep Taper 60 Tool Holder Inspection Gauge (Click image to enlarge)
Tool Gauge Demo (Click image to enlarge)
Steep Taper 30 Tool Holder Taper Inspection Gauge (Click image to enlarge)
  Details  Ask a Question  Request a Quote
Product Gauge


Taper Part Number
Steep Taper 30                430.124.930.000
Steep Taper 35                 430.124.935.000
Steep Taper 40                 430.124.940.000
Steep Taper 50                 430.124.950.000
Steep Taper 20                 430.124.A20.000

Steep Taper Spindle Plug Gauges
Steep Taper Spindle Plug Gauges

TAC Rockford gauges are used for inspection of steep taper spindle tapers per CAT, ISO, JIS, DIN, etc. Available for Steep Taper 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65

Details PDF (430.100)

Taper Part Number
Steep Taper 30                 430.100.830.000
Steep Taper 35                 430.100.835.000
Steep Taper 40                 430.100.840.000
Steep Taper 45                 430.100.845.000
Steep Taper 50                 430.100.850.000
Steep Taper 55                 430.100.855.000
Steep Taper 60                 430.100.860.000
Steep Taper 65                 430.100.865.000
Steep Taper (ISO) 10   Specify Gauge Diameter and Length              430.100.A10.000
Steep Taper (ISO) 15   Specify Gauge Diameter and Length              430.100.A15.000
Steep Taper (ISO) 20   Specify Gauge Diameter and Length              430.100.A20.000
Steep Taper (ISO) 25   Specify Gauge Diameter and Length              430.100.A25.000

Tool Holder Taper Inspection Gauge Instruction Manual
Tool Holder Taper Inspection Gauge Instruction Manual

Details

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Steep Taper 30 Tool Holder Taper Inspection Gauge) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Tool Holder Taper Sleeve Gauges
Tool Holder Taper Sleeve Gauges

Available for Steep Taper CAT/ANSI/DIN/BT/ISO 10, 15, 20, 25, 30, 35 40, 45, 50, 55, 60, 65

Page loaded in 0.1097 seconds.