430.120.940.000

Steep Taper 40 Tool Holder Taper Check Gauges

Steep Taper 40 Tool Holder Taper Check Gauges

Zoom Enlarge Image

Steep Taper 40 Tool Holder Taper Check Gauges

Detect tool holder taper wear in seconds

This product has been replaced by gauge 430.124. Click here to link to this product.

Features
  • Maximize tool life and spindle life
  • Ensure tool holder performance
  • Tool holder can be tested with components assembled, and works with retention knob installed
  • Includes (A) and (B) indicators with 0.0001" resolution
  • Carbide locating pins for long life
  • Made with hardened tool steel body
  • Comes with master shank (C)

Steep Taper 40 Tool Holder Taper Check Gauges (Click image to enlarge)
Steep Taper 40 Tool Holder Taper Check Gauges (Click image to enlarge)

Full Data Sheet (430.120)

PDF Data Sheet: Tool Holder Taper Check Gauges (430.120)

  Details  Ask a Question  Request a Quote
Product Gauge
Part Type Tool Holder Taper
Taper / Standard Steep Taper
Taper Size 40


Taper Part Number
Steep Taper 30                 430.120.930.000
Steep Taper 35                 430.120.935.000
Steep Taper 40                430.120.940.000
Steep Taper 45                 430.120.945.000
Steep Taper 50                 430.120.950.000

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Steep Taper 40 Tool Holder Taper Check Gauges) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias
Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Tool Holder Taper Inspection Gauge
Tool Holder Taper Inspection Gauge

Available for all steep taper tool holder sizes (20, 30, 35, 40, 45, 50, 55, 60)

The tool holder inspection gauge is designed to inspect tool holder taper diameters for wear and other potential problems. Verifying tool holder tapers are correct can help to maximize spindle life and improve part finish.

Please note that the taper inspection gauge will only check diameter on two planes along with taper angle. The gauge will not detect nicks or localized damage to the taper. We recommend using series 430.110 taper sleeve gauges in conjunction with the taper inspection gauge for this purpose.

The tool holder taper inspection gauge includes the Fixture Base and two Indicators (0.002mm or 0.0001 inch resolution). An optional 430.110 certified Taper Master is strongly recommended for zeroing the Indicators. If a master is not available, a knowngood tool holder can be used in place of the master.

Page loaded in 0.0904 seconds.