681.01214124616
HSK-A 100 Shrink Fit Chucks (Standard Length)
For carbide, Cermet and HSS tool shanks with tolerance h6 (DIN 69882-8 Form G)
Full Data Sheet (681.012.1412)
PDF Data Sheet: HSK-A Shrink Fit Chucks (Standard Length) (681.012.1412)
Product | Tool Holder |
Part Type | Heat Shrink |
Taper / Standard | HSK-A |
Taper Size | 100 |
D1 | 16 |
Length (L) | 200 |
For more information regarding this item (HSK-A 100 Shrink Fit Chucks (Standard Length)) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-A i-tec Shrink Fit Chucks Slim Version
Available for HSK-A 63, 100
HSK-C i-tec Shrink Fit Chucks Standard Version
Available for HSK-C 40, 50, 63
HSK-A i-tec Shrink Fit Chucks Inch Version
Available for HSK-A 63
HSK-A i-tec Shrink Fit Chucks Ultra Short Version
Available for HSK-A 63
HSK-A Shrink Fit Chucks (Standard Length)
For carbide, Cermet and HSS tool shanks with tolerance h6. Available for HSK-A 40, 50, 63, 80, 100. Other sizes and profiles available on request.
HSK-E i-tec Shrink Fit Chucks Extremely Slim Version
Available for HSK-E 40
MQL HSK-A Heat Shrink Fit Chucks for Automatic Tool Change
- New MQL standard
- l2 plug-depth at DIN 6535
- For 1-channel systems
- Balancing quality G6.3 / 15,000 rpm.
- For shank tolerance h6
MQL HSK-A Heat Shrink Fit Chucks for Manual Tool Change
- New MQL standard, l2 is plug-in depth at DIN 6535
- For 1-channel systems
- Balancing quality: G 6.3 / 15,000 rpm
- For shank tolerance h6
GISS 4000 Induction Shrink Fit Systems
Using shrink fit chucks as tool holders offers numerous advantages. Simple handling and above all excellent concentricity, extremely low imbalance as well as extreme clamping force, rigidity, longevity, and short shrink fitting for insertion times are convincing attributes.
GISS 2500 Induction Shrink Fit Systems
Pre-setting, shrink fitting, and measuring, all possible with one system, the GISS 2500 shrink fit system. In addition to tool pre-setting and induction shrink fitting, it is capable of also measuring the shrink fitting tools thanks to an optical measuring unit and intelligent software.