669.563.063.100
HSK-F Tool Holder Blanks - HSK-F63
Full Data Sheet (669.500)
PDF Data Sheet: HSK-F Tool Holder Blanks (669.500)| Product | Tool Holder |
| Part Type | Blank |
| Taper / Standard | HSK-F |
| Taper Size | 63 |
| D | 63 |
| L | 100 |
| f1 (mm) | 26 |
| f2 (mm) | 42 |
| d1 (mm) | 63 |
| d9 (mm) | 53 |
| Standard | DIN 69893 / ASME B5.62 |
| Taper | L | D | f1 (mm) | f2 (mm) | d1 (mm) | d9 (mm) | Standard | Part Number |
|---|---|---|---|---|---|---|---|---|
| HSK-F40...80 Custom Size | Contact us with your requirements | 669.500.SP | ||||||
| HSK-F63 | 100 | 63 | 26 | 42 | 63 | 53 | DIN 69893 / ASME B5.62 | 669.563.063.100 |
For more information regarding this item (HSK-F Tool Holder Blanks - HSK-F63) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK-F Tool Holder Blanks
TAC Rockford stocks HSK-F63 blanks. Other sizes are available on request.
HSK-T Tool Holder Blanks
HSK-T tool holder blanks made to ICTM standard / ISO 12164-3
HSK-T blanks have tighter tolerances on the drive key slots, however they can in most cases also be used in HSK-A spindles.
HSK-A 80 to 125 Tool Holder Blanks
<a href="https://tacrockford.com/product/tool-holders/blanks/hsk-taper/hsk-a25-to-63-tool-holder-blanks/">This data sheet has moved. Click here to go to data sheet 619.525.</a>
HSK-A Tool Holder Blanks
TAC Rockford stocks HSK-A32, HSK-A40, HSK-A50, HSK-A63, HSK-A80, HSK-A100, and HSK-A125 in a variety of diameters and lengths. HSK-A160 blanks are available on request as well.
HSK-C Tool Holder Blanks
- Contact us for other HSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
- DIN333 Form B center on blank end.
HSK-E Tool Holder Blanks
TAC Rockford stocks HSK-E32, HSK-E40, HSK-E50, and HSK-E63 blanks in a variety of diameters and lengths. Other sizes are available
- contact us with your requirements.
PSC/PSK Tool Holder Blanks
- Contact us for other PSK sizes, diameters, lengths, and other special requirements.
- Taper on standard blanks is finish hardened; blank portion not hardened.
Submit your feedback