685.AZS-B

HSK Axial-Clamping Manual Grippers for Direct Installation

HSK Axial-Clamping Manual Grippers for Direct Installation (Click image to enlarge)
HSK Axial-Clamping Manual Grippers for Direct Installation (Click image to enlarge)
HSK Axial-Clamping Manual Grippers for Direct Installation (Click image to enlarge)

PDF Data Sheet: HSK Axial-Clamping Manual Grippers for Direct Installation (685.AZS-B)

HSK-A HSK-B Key Size Torque Force Part Number
HSK-A/C/E 32     HSK-B/D/F 40    4    3 Nm  9 kN  685.AZS.032.B00
HSK-A/C/E 40     HSK-B/D/F 50    4    6 Nm  20 kN  685.AZS.040.B00
HSK-A/C/E 50     HSK-B/D/F 63    5    10 Nm  30 kN  685.AZS.050.B00
HSK-A/C/E 63     HSK-B/D/F 80    6    12.5 Nm  40 kN  685.AZS.063.B00
HSK-A/C/E 80     HSK-B/D/F 100    8    18 Nm  60 kN  685.AZS.080.B00
HSK-A/C/E 100     HSK-B/D/F 125    8    25 Nm  80 kN  685.AZS.100.B00

Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (HSK Axial-Clamping Manual Grippers for Direct Installation) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

KS Installation Tools
KS Installation Tools

Available for HSK-C 32, 40, 50, 63, 80, 100

HSK Axial-Clamping Manual Clamping Grippers
HSK Axial-Clamping Manual Clamping Grippers

The Axial pliers Spanner is a manual HSK-tensioners with axially in the center lying indirect drive, which is accessible both from the front and from behind. It is particularly suitable for clamping of HSK, especially grinding wheel shots, with the AZS can be integrated into the hub of a wheel on the one hand, (HSK arranged vice versa
- the spindle is the father) on the other hand, as usual, can be incorporated into the spindle using flange.

HSK-C 4 Point Manual Clamping Sets for Conventional Cooling
HSK-C 4 Point Manual Clamping Sets for Conventional Cooling


- For a coolant pressure up to 80 bar
- Includes installation and operating instructions

KS Clamping Cartridges for Minimal Lubrication (MLC)
KS Clamping Cartridges for Minimal Lubrication (MLC)

Available for HSK-C 40, 50, 63, 80, 100

HSK-C PowerClamp Manual Clamping Sets
HSK-C PowerClamp Manual Clamping Sets


- For coolant up to 80 bar
- Includes installation and operating instructions
- Includes threaded pin

HSK Hydraulic Self-Locking Clamping Systems
HSK Hydraulic Self-Locking Clamping Systems

The self-limiting clamping system for HSK tools developed by BERG Spanntechnik is used in conjunction with the proven HSH clamping sets. In this solution the wedge drive itself is rigidly connected to the clamping set via a drawbar.

Mounting Nuts for HSK-A/C Interface Adaption
Mounting Nuts for HSK-A/C Interface Adaption

Can be mounted in front of the spindle shaft after the installation of the collet. Has the advantage of being adaptable to HSK-E or HSK-F tool interfaces in an HSK-A spindle. Just use the drive key to expand and then clamp the desired tool. The ENS slot nuts can also be used in manual clamping units for more flexibility. Available for HSK 32, 40, 50, 63, 80, and 100.

Clamping Cartridge Installation Tools
Clamping Cartridge Installation Tools

For the installation of 4-point clamping sets, if there are difficulties locking the spindle.

Page loaded in 0.1227 seconds.