430.200.840.000
Steep Taper 40 Spindle Taper Dial Indicator Gauge
| Product | Gauge |
| Part Type | Spindle Taper |
| Taper / Standard | Steep Taper |
| Taper Size | 40 |
| Part Number | ||||||||
|---|---|---|---|---|---|---|---|---|
| Steep Taper 30 | 430.200.830.000 | |||||||
| Steep Taper 35 | 430.200.835.000 | |||||||
| Steep Taper 40 | 430.200.840.000 | |||||||
| Steep Taper 45 | 430.200.845.000 | |||||||
| Steep Taper 50 | 430.200.850.000 | |||||||
| Steep Taper 55 | 430.200.855.000 | |||||||
| Steep Taper 60 | 430.200.860.000 |
For more information regarding this item (Steep Taper 40 Spindle Taper Dial Indicator Gauge) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
HSK Dial Indicator Spindle Taper Gauge Manual
Instruction manual for the dial indicator spindle taper gauge (410.310)
Steep Taper Spindle Taper Dial Indicator Gauge
TAC Rockford's steep taper spindle gauge is designed to verify and measure correct location of the spindle gauge line.
The gauge comes as a complete set with carrying case, dial indicator, and master taper for setting the dial indicator
Pneumatic Spindle Taper Gauges
Non-contact measuring with nozzles results in high accuracy and consistency of measuring results. The measuring range can be increased with the built-in dial indicator. This enables the gauge to be used during pre-machining of the taper. Measuring set with case includes nozzle plug gauge with dial indicator and 2 setting rings.
Series 410 Dial Indicator Tool Taper Gauges
Both measuring gauges are set to zero with the calibrated taper plug gauge. When an HSK tool holder is inserted in the ring gauges, deviations in diameters d2 or d3 are shown on the indicator.
Dial Indicator Spindle Taper Gauges
To ensure sustained accuracy at HSK interfaces, we recommend comparison measuring of the geometry of HSK tool shanks and spindles at regular intervals. These checks should become more frequent with an increased change rate at the interface. Calibration on request.
Tool Holder Drive Key Tool Taper Gauges
Available for HSK 32, 40, 50, 63, 80, 100, 125, 160
HSK Tool Holder Taper 30 Degree Clamping Angle Gauges
Using the calibrated master, the distance of the 30 degree clamping slope relative to l 2 is preset using the dial indicator holder. The tool taper to be measured is placed in the centering piece, allowing the variation of the taper to be measured.
Steep Taper Spindle Gauge Manual
Download PDF for instruction manual.
Pneumatic Steep Taper Spindle Gauge Kits
Gauging kit for Steep Taper, CAT/ANSI, ISO, BT spindles with pneumatic measuring system. The Multifunctional Measuring and Control Device is designed for high precision and multifunctional capabilities. In addition to providing various ways for measuring input, it can be customized to meet customer requirements.
Tool Holder Taper Complete Measuring Units
Calibrated with a gauge master, the taper gauge checks large taper diameter, small taper diameter, straightness of the taper, relationship of the flange to the taper, and taper length.
Submit your feedback