490.137.00196
Okuma Lathe Turret Alignment Bars
Full Data Sheet (490.137)
PDF Data Sheet: Lathe Turret Alignment Bars (490.137)| Machine | L | D | Interface/Models | Part Number | ||||
|---|---|---|---|---|---|---|---|---|
| DMG Mori | 220 | 40 | CTX310ECO-BMT / NZ1500 / NZ2000 | 490.137.00193 | ||||
| DMG Mori | 300 | 50 | NLX1500-NLX2000 / NLX2500-NLX3000 NL2000 (S)MC-2500 (S)MC / NL3000MC (12 Stations) |
490.137.00194 | ||||
| Okuma | 300 | 50 | LB2000 EX (M, MY) / LB2500 EX (M) LB3000 EX (M, MY) / LB3000 EX (MW, MYW) |
490.137.00195 | ||||
| Okuma | 300 | 50 | LB4000 EX (M, MY) | 490.137.00196 | ||||
| Doosan | 220 | 40 | BMT45 • LYNX 220LM | 490.137.00197 | ||||
| Doosan | 220 | 40 | BMT55 • PUMA230-240M / MS-280LM-1500-2000-2500M/MS/S/SY 2100 SERIES-TT1500-TT1800MS/SY / TL2000-2500LM-MX1600/2100TS LYNX 300M |
490.137.00198 | ||||
| Doosan | 300 | 50 | BMT65 • PUMA300M/MS-V400M-TT2000SY-TT2500SY TT2500MS-2600/3100 Series / MX2000ST-MX2500T/ST/LST-VT450/TM Inverturn 3000M |
490.137.00199 | ||||
| Doosan | 300 | 50 | BMT75 • PUMA400-480M/LM/XLM-VT 750M/TM | 490.137.00200 | ||||
| Mazak | 225 | 40 | QTS200M | 490.137.00201 | ||||
| Mazak | 325 | 50 | QTS300M | 490.137.00202 | ||||
| Biglia | 220 | 40 | B301/445/470/501(Y-S)/510/545/550/565/650/658 1200/446/465/745/765-B750/1250 16 ST BV210/315 |
490.137.00209 | ||||
| DMG Mori | Contact us | TL-40Y/4000 | 490.137.00283 |
For more information regarding this item (Okuma Lathe Turret Alignment Bars) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Lathe Turret Alignment Bars
Lathe turret test bars provide an easy way to verify turret perpendicularity. Bars are installed in the turret like a standard tool. Test bars have an accuracy of 0.003mm (0.00012 inch) and include a carrying case and certificate.
VDI Lathe Turret Alignment Bars
Lathe turret alignment bar for VDI interface. Used for both testing concentricity of the interface as well as center alignment and adjustment on a lathe. Made to DIN 69880 standard.
465.V50.59767 is a special configuration used on certain Mazak machines. Contact us for further information.
Contact us for other sizes or special requirements/configurations.
A2 Flanged Lathe Spindle Runout Test Bars
Test arbor for mounting to turning-center and measuring run-out. Designed for A2-5, A2-6, etc. lathe face mounting. Also available for flat 110 and 140 lathe face.
- Maximum runout error 0.003mm [0.00012 in.]
PSC (PSK) Tool Changer Alignment Gauges
Available for Polygonal-Shank Taper sizes C3, C4, C5, C6, C8, C8X, C10. Includes padded storage case.
Lathe Spindle Face Ring
Series 492.026 ring gauges are for lathe spindle face.
Steep Taper Tool Changer Alignment Gauges
Available for Steep Taper 30, 40, 50, and 60. Includes padded storage case.
Capto Tool Changer Alignment Instruction Manual
The tool changer alignment tool is to verify proper alignment between the automatic tool changer (ATC) and the spindle or clamping unit. See PDF for full instruction manual.
HSK Tool Changer Alignment Gauges
Available for HSK-A 25, 32, 40, 50, 63, 80, 100, 125, and 160. Includes padded storage case.
Lathe Spindle Face Ring With Indicator Mounts
Series 492.126 ring gauges are for lathe spindle face.
Submit your feedback