560.215
Haimer Power Clamp Power Coolers
The Power Cooler is a new cooling unit to cool down tool holders. An air stream interspersed with a fine water mist cools down the shrink fit chucks of any shape in record time.
PDF Data Sheet: Haimer Power Clamp Power Coolers (560.215)The Power Cooler is a new cooling unit to cool down tool holders. An air stream interspersed with a fine water mist cools down the shrink fit chucks of any shape in record time.
• Contour-independent cooling, therefore universal applicable for all sizes and diameters of shrink fit chucks
• Cools thick-walled tool holders far faster than common cooling systems
• A closed circuit with return of water and steam enables usage in clean areas such as the tool management or tool assembly
• Is intended to be docked to the Power Clamp Premium machines
For more information regarding this item (Haimer Power Clamp Power Coolers) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Power Clamp Preset Network Heat Shrink Systems
The Power Clamp Preset Network is based on the time-tested Power Clamp Preset. It is equipped with a PC that acts as the interface to your tool management and controls the shrink fit operation as well.
Power Clamp Nano Heat Shrink Systems
The all new Power Clamp Nano is your entry into the world of micro machining.
The new shrink fit machine was specifically developed for small interfaces, i.e. HSK 25, HSK 50 and SK/BT 30. The horizontal design ensures easy handling especially at tools with smaller diameters. By its modular system construction Power Clamp Nano fulfills the various customer requirements very well.
Power Clamp Mini Heat Shrink Systems
Simple shrink fit machine for small tools.
- Power: approx. 3 kW
- Mains voltage: 230 V, 50-60 Hz
- Tools: only solid carbide from Ø 3-16 mm
- Can be used anywhere due to one phase power supply
Power Clamp Premium Plus Heat Shrink Systems
The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly centered put on the hot shrink fit chuck. The cool down phase is terminated temperature controlled automatically.
Power Clamp Premium Heat Shrink Systems
The Power Clamp Premium/Premium Plus is the shrink fit machine for perfectionists. The cooling bodies are fixed at linear guides. For the cooling process they are exactly centered put on the hot shrink fit chuck. The cool down phase is terminated temperature controlled automatically.
Power Clamp Economic Heat Shrink Systems
High performance shrink fit machine for all tools.
- With standard coil
- Single chuck version
- Without cooling
Power Clamp Economic NG Heat Shrink Systems
High performance shrink fit machine for all tools.
- With intelligent NG coil
- Single chuck version
- Without cooling
Power Clamp Shower Coolers
For rapid cooling of tools. Add-on for all shrink fit machines.
- Suitable for all contours
- Drying by rotating air nozzles
- Supplementing existing cooling systems
- Cooling time < 1 min.
Power Clamp Basic Heat Shrink Systems
Standard shrink fit device for all tools (solid carbide and HSS).
- Power: approx. 10 kW
- Mains voltage: 3x360-500 V, 16 A
- Tools: solid carbide and HSS from Ø 3-32 mm
Submit your feedback