683.509
Guhring HSK-C to Steep Taper (DIN 2080) Basic Adapters
- With ring notch for Ott clamping system - Includes clamping set - Includes brass locking ring - Order clamping key and draw-in bolt separately
PDF Data Sheet: Guhring HSK-C to Steep Taper (DIN 2080) Basic Adapters (683.509)
| Steep Taper (SK) | HSK-C (d1) | Length (l1) | d2 | SW | Part Number | |||
|---|---|---|---|---|---|---|---|---|
| Steep Taper (DIN 2080) 40 | HSK-C 50 | 40 | 63.0 | 4 | 683.509.040.050 | |||
| Steep Taper (DIN 2080) 50 | HSK-C 50 | 40 | 97.5 | 4 | 683.509.050.050 | |||
| Steep Taper (DIN 2080) 50 | HSK-C 63 | 40 | 97.5 | 5 | 683.509.050.063 |
Product Information • With ring notch for Ott clamping system
Scope of delivery • Includes clamping set
• Includes brass locking ring
• Order clamping key and draw-in bolt separately
For more information regarding this item (Guhring HSK-C to Steep Taper (DIN 2080) Basic Adapters) or other items, fill out the form below
or contact our office directly:
Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm
Related
Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080) Reducing Adapters
Converts Steep Taper (MAS 403 BT) to Steep Taper (DIN 2080)
Steep Taper (DIN) to Steep Taper (ISO) Reducing Adapters
For tools with Steep Taper DIN 2080, DIN 69871, or MAS 403 BT.
Steep Taper (MAS 403 BT) to Steep Taper (ISO) Reducing Adapters
For tools with Steep Taper DIN 2080, DIN 69871 or MAS 403 BT.
Steep Taper (DIN) to HSK Adapters
Adapts from DIN 69871 (standard taper) to DIN 69063 (HSK taper). Maximum runout between steep and HSK taper is 0.003 mm.
Steep Taper (CAT/ANSI) to HSK Adapters
Adapts from CAT / ASME (ANSI) B5.50 (standard taper) to DIN 69063 (HSK taper).
HSK-C to Steep Taper (ISO) Basic Adapters
- Form B available on request
- Part 683.512.050.100 only applies to presetting unit
- Includes clamping set
- Includes brass locking ring
Submit your feedback