682.420.0700

Kelch HSK-A Reduction Sleeves for Straight Shanks Slim Version

Available for HSK-A 63

PDF Data Sheet: Kelch HSK-A Reduction Sleeves for Straight Shanks Slim Version (682.420.0700)

UseFor holding shank tools with lateral driving surface, DIN 1835-1 type B and inclined clamping surface (2º), DIN 1835-1 type E or DIN 6535 type HB and HE.

DesignPermissible concentricity deviation of hollow taper shank to location hole d 1= 0.003 mm (measured at 3 x D cantilever length). Chucks are fine balanced according to ISO 1940-1 G 6.3 at 12,000 rpm.

Standard SpecificationClamping screw and adjusting screw included.

NoteFor an increased machining accuracy the bore tolerance is much reduced compared to DIN 1835.

Bored through adjusting screw for coolant. Other designs and sizes are available on request.


Was this information helpful? Provide feedback or ask a quick question about this item.


Your name:
Your company:
E-mail:

For more information regarding this item (Kelch HSK-A Reduction Sleeves for Straight Shanks Slim Version) or other items, fill out the form below or contact our office directly:

Telephone: 815-962-5600
Fax: 815-962-4600
Location: 304 North Main St, Suite 104, Rockford, IL 61101-1101 USA
Email: infο@ΤΑCRοckfοrd.cοm

Add Comment

Alias

Full name
Position/Title
Company
Telephone
Fax
Email
Mailing Address

Receive a quote or more information on:


Questions or comments:


How did you hear about us?
   Other:


Your preferred method of contact

Related

Page loaded in 0.1051 seconds.